Results 1 to 1 of 1
Thread: New windows double glazed
-
24th September 2024, 09:44 PM #1
New windows double glazed
Ive got a kitchen renovation to do.
First thing is some new awning windows are needed and I'm going have a go at making the new frame of one and altering the second one by filling in the bottom half then cover that with plaster and weather board. And hopefully fit new double glazed panes to the new and altered parts. If that is a good way to go. Otherwise a new unit will be made so both are new.
Whats the best to go with on the double glazing for cold Vic winters. Is 4mm glass with 6 mm gap good? 4 6 4?
One mate was saying 6 6 6. Another says 4 6 4. 4 6 4 will be easiest for me to fit if using the old frames on the tall one.
The window on the right needs replacing with a taller one to match the height of the left window.
The one on the left can possibly be filled in on the lower section and two new DG Panes added.
IMG_7971a.jpg
Outside view.
That right lower section could be filled with a beam under it for support and framing to take plaster and weatherboards? Or take the whole thing out and replace?
IMG_7985.jpg IMG_7986.jpg
Any recommendations?
Thanks . Rob
Similar Threads
-
Double glazed windows???
By Roger Peine in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 20Last Post: 21st August 2018, 08:12 PM -
Replacing windows with double-glazed
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 1st March 2013, 10:00 PM -
double glazed windows
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 20th May 2010, 06:50 PM -
Custom double-glazed windows
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 16th January 2010, 10:00 PM -
Cleaning Double Glazed Windows
By Grunt in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 5Last Post: 12th February 2004, 09:29 AM
Bookmarks