Results 1 to 6 of 6
Thread: understanding dead vs live load
-
4th November 2024, 09:25 PM #1GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 312
understanding dead vs live load
hey everyone,
building a deck and going through the old engineering stuff i'm just trying to understand the weight ratings of dead vs live load. we're considering changing the decking to FC sheet and tiles.
the dead load is 0.5kPa
the live load 1.5kpa
so does that mean I can have 50kg/m2 of dead/permenant weight
and then 150kg/m2 of non permanent weight on top of it that comes and goes?
I just cant see see a (in theory) 100m2 deck being able to take 15ton of live weight spread over the whole thing??
-
5th November 2024, 09:19 AM #2Member
- Join Date
- Jan 2009
- Location
- Reservoir Melbourne
- Posts
- 77
Think of a couple of dozen people headbanging to loud music and jumping up and down in rhythm. 24 * 90kg* the acceleration due to gravity, that's why the live load is in kiloPascals not kilograms
-
5th November 2024, 09:21 AM #3Senior Member
- Join Date
- Jun 2010
- Location
- SW Victoria
- Posts
- 107
I've been concerned about the total weight too, but then consider the likely use of the deck (for example). At 150kg/m2, it's unlikely every square metre will ever have 2 x 75kg people standing in it at the same time. Even if you have 200 friends around, they aren't going to be comfortable on a 100m2 deck. If the deck has a few tables on it that further reduces the total possible load (unless that's where you dance). It "passively" manages itself
-
5th November 2024, 09:27 AM #4Member
- Join Date
- Jan 2009
- Location
- Reservoir Melbourne
- Posts
- 77
Decks and balconies have had a habit of collapsing in the past; so the need to built to some sort of minimum safe standard is necessesary
My 90kg per person was perhaps a bit pessimistic, 75 is probably closer to the reality, unless you are hosting a couple of the local rugby teams and we are so old now we no longer dance on tables.
-
5th November 2024, 09:51 AM #5GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 312
it just seems like ALOT of weight that it can handle.
and at what point does overloading the dead load eat into your live load?
-
5th November 2024, 10:08 AM #6Member
- Join Date
- Jan 2009
- Location
- Reservoir Melbourne
- Posts
- 77
Good question.
I've always assumed it is when either the total or the localised dead load exceeds 40kg per square metre, four of those afore mentioned rugby players could well fit on a square metre, the design rules have details regarding point loads to cover some things but I'd say they cannot cover all eventualities.
Loading a table that has skinny legs with a full Christmas dinner buffet could easily point load a floor like that
Similar Threads
-
Live rich,Live Poor
By John Saxton in forum JOKESReplies: 0Last Post: 2nd December 2020, 07:53 PM -
Age v understanding
By Rodgera in forum JOKESReplies: 0Last Post: 18th April 2015, 05:04 PM -
Need help understanding this recipe ...please.
By JDarvall in forum FINISHINGReplies: 22Last Post: 7th March 2010, 06:06 AM -
Telcos: can't live with them, can't live without them
By artme in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 3Last Post: 9th December 2009, 12:52 PM
Bookmarks