Sunday Round Table Jabber - Sunday evening all welcome

I'll b e home firing my kiln so I will be here.

For Matt - the link to the glass-lensed magnifier I bought. Headband Magnifier Head Wearing Jeweler Reading Magnifying Glass Loupe Optivisor | eBay

The Titan Mortise chisel i had found,
https://uploads.tapatalk-cdn.com/202...c465ed1115.jpg
https://uploads.tapatalk-cdn.com/202...09adc4c529.jpg
https://uploads.tapatalk-cdn.com/202...912c32632d.jpg

Cheers Matt.

Matt

A quick look at Dick Lynch's book "Collecting Titan Chisels" would indicate it is a type 101 being a heavy firmer (registered) chisel and because of the blade stamp, "Titan Guaranteed," from late fifties to early sixties before the association with Stanley. I assume it is 1/8" as the stamp is on the side of the blade (not enough room on the face where it would normally be.

The type 101 together with the 106 (bevel edge) were the heavy duty work horses of the Titan range (together with the socket chisels). I don't think they made a mortice chisel as such, but your chisel is close enough to that thickness by the look of it. Good pick up.

Regards
Paul

Quote:

---

Originally Posted by Bushmiller

Matt

A quick look at Dick Lynch's book "Collecting Titan Chisels" would indicate it is a type 101 being a heavy firmer (registered) chisel and because of the blade stamp, "Titan Guaranteed," from late fifties to early sixties before the association with Stanley. I assume it is 1/8" as the stamp is on the side of the blade (not enough room on the face where it would normally be.

The type 101 together with the 106 (bevel edge) were the heavy duty work horses of the Titan range (together with the socket chisels). I don't think they made a mortice chisel as such, but your chisel is close enough to that thickness by the look of it. Good pick up.

Regards
Paul

---

Thanks Paul, it’s actually about 4 mm thick.
But I will measure it when I’m finished work, I might even be nice an use that oldie measuring scale thingy [emoji6].

Cheers Matt

Paul,I’m very sorry it’s not even close to 4 mm it’s km out[emoji6].
https://uploads.tapatalk-cdn.com/202...c14ad1e315.jpg
https://uploads.tapatalk-cdn.com/202...1c3a782455.jpg

I hope you appreciate me pushing that button on the callipers.

Cheers Matt.

Ahem Matt

I'm not sure which one of us is pushing whose buttons here! I make it 3.43mm = .0135" = 1/8"

QED.

:wink:

Regards
Paul

PS: Nice cutting mat. Yours?

PPS: Nearly 1Km off!

Quote:

---

Originally Posted by Bushmiller

Ahem Matt

I'm not sure which one of us is pushing whose buttons here! I make it 3.43mm = .0135" = 1/8"

QED.

:wink:

Regards
Paul

PS: Nice cutting mat. Yours?

PPS: Nearly 1Km off!

---

See that’s why i just stick with the far simplicity, better French method,now i need to spend another hour in the corner,crying with Sally telling me to get over my self, suck it up princess.
You give as good as you get[emoji30]

Cheers Matt

I was hoping to get on for a chat sunday just gone, I hope to have some time this sunday coming!.

If anyone's in the market for zero clearance mitre bar, Ive just done a triple review:

Zero Clearance Mitre Bar Review Roundup: Microjig, Incra, Germerse

I won't be able to make the Jabber. Working again :( keeping your beer fridge on line :D.

All the best to my visual mates.

Regards
Paul

Quote:

---

Originally Posted by Bushmiller

I won't be able to make the Jabber. Working again :( keeping your beer fridge on line :D.

All the best to my visual mates.

Regards
Paul

---

Paul,
I hope you have a very heathen Christmas and its cider by the way not beer [emoji41].

Sunday is hear again the end of the Week.
(Boxing day special)
That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tomorrow’s hot to trot subject matter(Not that we stick to it,but we do try)
Drum roll Please,
Being a Box day special If you got a Xmas woodworking present how about a show an tell, if you didn’t well join in any way.


Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt

At this stage I think I will be available. :2tsup:

Sunday is hear again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tonight’s hot to trot subject matter(Not that we stick to it,but we do try)
Drum roll Please,
Being the first for the New year,how about free for all.




Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt