Rayburn wood burning stove

They are useless. Put it out on the next council pickup (just tell me exactly where and when you are putting it out). Watch out for the ute coming up the street.

Even if you put in a cheapo upright for your normal cooking, they are worth it jjust for the room heating.

Quote:

---

Originally Posted by davo453

The only real down side of the Rayburn (well ours anyway) is that the hot water jacket preasure has to run at a lower level than our pump runs the cold at, means you have to be very acurate with the taps when taking a shower.

---

We had the same problem Dave and when we upgraded the bathroom the plumber was very selective as to the shower we installed. He minimised the problem.

I have been trying to remember the details, but cannot. I do remember clearly that the first ten or so showers that my wife selected, the plumber rejected as incompatible with our hot water pressure - I vaguely remember that it was related to the type of mixer.

I am sorry I cannot be more helpful, but it might be worthwhile for you to talk in your local plumbing/bathroom supplies shop.

Cheers

Graeme

does anybody know of anybody who would repair an Rayburn 2. I am not sure what is wrong with it
I live in the upper northshore of sydney

This may not be of much help to you, but there is a bloke here who rebuilds them (and other stoves). Seems to be very knowledgeable about them. Ray Collins is his name, look at Bairnsdale Stoves Heaters & BBQs | Stonemell, Cookers, Service, Spare Parts | Bairnsdale VIC

Obviously a long way from where you are, but you may be able to get phone advice from him, or a contact in your area, or spare parts if that's what you need.

What sort of repair do you need?

Contact the AGAShop in Melbourne on 03 9521 4965. They are the importers and they have an outlet in Sydney. They should be able to recommend someone to help you.