Ebonizing or " rust stain "

Printable View

1st July 2004, 02:07 PM
darley

Ebonizing or " rust stain "

I would like to share this site with everyone , I did try and turn out good, sand with old towel not sand paper.

http://joewoodworker.com/ruststain.htm

Cheer
1st July 2004, 05:53 PM
echnidna

It should work with some of our aussie timbers like messmate too. And maybe on the light sapwood of blackwood
2nd July 2004, 09:24 AM
darley

Probably I never work with messmate or light sapwood, but I did try it on mango and it turn out good after 8 coats and finished with sandy seal. this litle recipe make 200 ml of stain

Cheer

All times are GMT +11. The time now is 11:47 PM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.