flashings between vertical weatherboard cladding and laserlite pergola

Hi,

I built a timber pergola with laserlite roofing. I am looking for L shaped cost effective flashing to seal a 20mm gap between the laserlite and the weatherboard cladding of the house. The gap is max 20mm, the cladding extend about 150mm above the laserlite so either stick the top end of the flashing under the next cladding, or if its a flashing with a bent end, notch the cladding and stick in the edge.

Would appreciate suggestions. I am in NSW.

thanks


Read the full thread at RenovateForum.com...