How do I attach Pergola with roof sheeting to metal facia with a 600ml eves.
Thanks
Hard Wood Stud
Printable View
How do I attach Pergola with roof sheeting to metal facia with a 600ml eves.
Thanks
Hard Wood Stud
You don't :rolleyes: . Not structurally anyway, fascia is there just to trim the roof edge and hold the gutters up. It should not be used to hang pot plants, shade cloth, bamboo blinds etc etc. it should definitely not be used to support a pergola.
Mick
when i attatch a pergola to a house, i nog out between the rafters and behind the facia, so i can bolt a beam to the facia and throu the nog. Go to tradac they will show you the design! Hardest part is taking the tile off.
You have to have timber behind itQuote:
Originally Posted by Hard Wood Stud
thats what the nog is (noggin) between the botom of the rafters or trusses
You take the soffit out (or roof tiles off) and bolt pergola brackets to the end of the rafters. You drill and slot the facia to put the bracket in.....all after the engineer has looked at the windage/ drainage etc and oKed it.... which is why most are not done this way:rolleyes: ..but thats one of the proper ways.
And to my knowledge thats the first time Gumby has been called a noggin.:rolleyes:
Sorry Gumby.
did not mean to call u a nog
The soffit is the underside of the eves, not the roof tile, did u learn this diy ladies night at bunnings?Quote:
You take the soffit out (or roof tiles off) and bolt pergola brackets to the end of the rafters.
I've been called worse :DQuote:
Originally Posted by DanM
DanM, I think squizzy meant you can either take the soffit out from underneath, or take the roof tiles of from above to fit the brackets.Quote:
Originally Posted by DanM
Yes, thats why it says "or"...and I don't go to Bunnings:(Quote:
Originally Posted by Wood Butcher