Well, after over 10 years in the timber industry it's time to move on.
I'll be starting a Fitting and Turning apprenticeship in 6 weeks and I'm super excited about it :D
As they say in the classics "Yibedee yibedee, that's all folks!"
Printable View
Well, after over 10 years in the timber industry it's time to move on.
I'll be starting a Fitting and Turning apprenticeship in 6 weeks and I'm super excited about it :D
As they say in the classics "Yibedee yibedee, that's all folks!"
New challenges, new horizons, wish you well and no doubt you will have some interesting projects to share, maybe even a blending of the two
Joining the metal work forum?
Already have :2tsup:Quote:
Originally Posted by BobL
Welcome to the dirty side.:D
Kryn
Enjoy the new challenges
Best wishes on your new path. You can never stop learning.
Regards
Keith
At least I won't have to walk around in a mask all day...that's been pretty crappyQuote:
Originally Posted by KBs PensNmore
That dust gets everywhere!!! Just finished reading 3 volumes of Fitting and Machining, written by Victorian TAFE, that I picked up from Ebay. Some very interesting reading and learnt quite a bit from them.
Enjoy your new challenge.
Kryn
don't just disappear to the oily sideQuote:
Originally Posted by elanjacobs
is this change for personal development -- i.e. a new hobby -- or a new career.
If the later I'd be interested in hearing your thoughts on the long term future of fitting and turning. The impression I have is that CNC has made more inroads into fitting and turning than it has into cabinet making.
Don't be fooled, MW has its own problems that often go unseen and untreated. I have a relatively rare health condition called sarcoidosis for which some metals have been implicated.Quote:
Originally Posted by elanjacobs
Firstly there's the gasses given off by various forms of heating/welding process - even TIG and plasma cutters that uses no flux gives of heaps of particles plus CO, NO, and when SS is involved Cr oxides.
Grinding/polishing etc can produce as much invisible dust as wood working, not just the metal but also the grit and its bonding agent - fortunately being heavier it falls out of the air faster than wood, but the fact that it is not always accompanied by visible dust is a concern.
A number of solvents and chemicals are used that can cause problems.
I envy you If there is one thing I regret [and I don't regret much] its not being better at fiddling with machines.Good luck .
Being able to fiddle with machines is a mixed blessing.Quote:
Originally Posted by mature one
It means you can fix most things when they go wrong and it can be fun but it can put a HUGE dent in productivity of other things.
If you thing woodies are bad at making tools, jigs and rigs then because they can literally make their own machines some metal machinists take that to the next level.
Hello elanjacobs, or should I say bye ? I hope you still frequent the forum as your knowledge and commonsense have been appreciated.
Whatever you take on I'm sure you will excel in. I wish you all the best and am sure you will enjoy it.
pker
Too hard to edit multi quotes on mobile, so long post follows.
Don't worry, I'll still be here, just not in the industry for the foreseeable future. This is a career change for me, both for professional and health reasons. I can't get the precision I want in timber and I sing semi-professionally on the side and can't afford to do my voice/throat any more damage.
Kryn, I picked up the same book at the last HTPAA sale and am finding it really good.
Bob, there's no welding where I'm going, I checked out one place a while ago and could smell the fumes as soon as I walked in and I didn't want a bar of it. I'm tipping that coolant would keep most of the grinding and honing dust contained too.