Printable View
Hi,
this is one of my next projects and I'm looking for guidance. I'm thinking of a light sand using Festool rotary sander 150/5 on the top only then matching stain followed by Feast and Watson Wipe On Poly all over (handles removed of course).
Attachment 420593Attachment 420594Attachment 420595
You will probably find the stains on the top will cause you some grief.
Best of luck.
John
Attachment 420635Attachment 420634Attachment 420632
I refurbed one for a entertainment unit. Came up a treat. The old veneer is thicker than modern stuff so you might be able to sand out the water rings.
I frenched polished mine after sanding it wright back starting with 120g. Good luck.
That is spectacular.
I have stained and it comes up nicely :)
Finally some stain and less visibility on the water marks
Attachment 420644Attachment 420645Attachment 420646
What did you do to get such shine?
Wet sanding from 600g to 2500g then some micro mesh to 12000g then buffing. yeah a bit of work involved.
Front and side sanded to surprise me with the condition .Attachment 420710Attachment 420711Attachment 420712Attachment 420713Attachment 420714
Finally stained chocolate walnut
Attachment 420717Attachment 420718Attachment 420719