Printable View
In 2011 there was a request by rmm1 for plans and other help regarding a platform lift powered entirely by mains water pressure. I know these lifts exist, but have been unable to find construction plans. Is anybody able to supply a plan, or direct me to such plans? I'd appreciate it. Thanks.
As a child I can remember being in a passenger lift at a Sydney hospital, possibly St Vincents, and Dad telling me it was powered by water. From a child's memory and decades later there was a stationery steel rope in one corner of the lift and a leather hand guard on it that was used to move the lift by pulling upwards or down on the rope as required.
Welcome to the forum.
The Strand Arcade in Sydney had hydraulic lifts, and they were in operation long after the Sydney Hydraulic Power Company ceased operations (some of the ponds around Mill Pond Drive at Mascot were part of their works). You might check with the Strand's management to see if they are still hydraulic lifts & if so, who does their maintenance.
G'Day & Welcome to a top forum "hff".
There are quite a few members in North Queensland & across the rest of Queensland plus the rest of the world.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork......
Cheers crowie
Welcome to the forum