Strength of Caesarstone

Printable View

3rd August 2009, 06:20 PM
Reno RSS Feed

Strength of Caesarstone

Hi All,

We will be installing a 20mm Caesarstone benchtop on the cabinet in the attached drawing.

Will the Caesarstone be strong enough to span the 1200mm space indicated?

This is over our washing machine and dryer - it is a very tight fit, without enough space to fit a divider between the two machines

Basically, the carcass for this part of the cabinet comprises an 18mm melamine top/substrate supported by two side panels and a backboard. The Caesarstone will run over the top of the substrate. Bench top will be 640mm deep.

Cheers,
Jonty

Attached Thumbnails http://www.renovateforum.com/attachm...1&d=1249274981

Read the full thread at RenovateForum.com...

All times are GMT +11. The time now is 06:46 PM.

NavTabs provided by vBNavTabs (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.

Copyright © U-Beaut Enterprises 1999 - 2016. All rights reserved.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.