Reno RSS Feed
22nd May 2009, 10:10 PM
Hi Guys,
I'll be applying Cabots Water based CFP gloss finish to my floors this weekend with lambswool applicator and just wanted some tips on the application, etc. I know all of the stuff that is recommended on the tin and in brochures, but I was hoping for some advice from you guys :U
Some of my questions:
- How long do I leave it to dry in between coats? (I'm in Sydney, so its a bit cold and rainy these days)
- Do I need to sand inbetween coats, and if so, what sort of grit?
- How long do I have once its on the floor before it starts to become hard to spread?
- What is the best method to cut into the corners and in awkward spots? Brush?
- Is there any specific type of brush that gives good results?
Thanks for any help!
Dan
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/showthread.php?t=76306&goto=newpost)
I'll be applying Cabots Water based CFP gloss finish to my floors this weekend with lambswool applicator and just wanted some tips on the application, etc. I know all of the stuff that is recommended on the tin and in brochures, but I was hoping for some advice from you guys :U
Some of my questions:
- How long do I leave it to dry in between coats? (I'm in Sydney, so its a bit cold and rainy these days)
- Do I need to sand inbetween coats, and if so, what sort of grit?
- How long do I have once its on the floor before it starts to become hard to spread?
- What is the best method to cut into the corners and in awkward spots? Brush?
- Is there any specific type of brush that gives good results?
Thanks for any help!
Dan
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/showthread.php?t=76306&goto=newpost)