Appling Clear Finishes

[poltac]

Hi just wondering how to apply clear with having brush marks when dry.
I've sanded and recoated but still get brush marks when dry.
also what is the polyurethane wipe on finish that you here about
Thanks
John

[Claw Hama]

You can grab a can from Bunnies, wipe on poly, shake, open, tip onto a lint free cloth and wipe on. Follow the directions on the can. Or I use 2 to 3 coats of Estapol and then cut them back with wet and dry(600-800) with oil and then finish with 0000 steel wool and oil. Super smooth.

[poltac]

What brand is the wipe on polyurethane
Also when you have done with the steel wool what oil would you use

John

[Claw Hama]

Use the oil with the wet and dry and with the steel wool, any realy it's just a lubricant, Sifa have a good furniture oil or you can just use turps. www.sifa.com.au/sifa_timber_range.pdf (http://www.sifa.com.au/sifa_timber_range.pdf)

[poltac]

Ok I'll give that a try
Thanks

john