bward
16th March 2009, 11:28 PM
I've got two restoration projects that I now have the same question about after reading Neils Polishing Handbook.
The Question being: Do these need refinishing or would a reviver treatment be all thats needed.
The First one is a drop sided oak auto trolley. The solid oak top has beautiful grain but the finish had a few scratches in it. Before I got Neils handbook I tried cleaning with 50/50 Metho and Pure Turps. I stopped when it started removing polish in one area and not really evening out. Also I noticed the shellac fogged up a bit which I now put down to moisture content of the metho I was using, the fogging seemed to disappear or at least isn't noticable after it dried. I'm not sure what the next approach should be. Rub pure metho over the surface and see if it will even up. Or will I need to now rub off the old shellac and reapply fresh shellac. I'm assuming the lighter patch I've already created is more a refinish job and not something that can be tackled with reviver.
The second and much larger job is my antique dining setting delivered last weekend. It's also oak and the old carvers show that lovely worn in look on arms. The setting is from an estate and the polish needs a freshen up but I'm now thinking U-Beaut reviver might be all that required before a good wax. I want to clean and bring up the surface buffing out minor scratches but I want the piece to maintain its beautiful aged quality where its more worn showing a more golden oak.
I've only just got into buying antique furniture but prefer the conservation approach where a peice is made functional and servicable versus the restorative approach which can make an antique look indistinguishable from a brand new peice.
So in reference to my fundamental question. When will reviver do the job vs the need for refinishing.
regards
Brian
The Question being: Do these need refinishing or would a reviver treatment be all thats needed.
The First one is a drop sided oak auto trolley. The solid oak top has beautiful grain but the finish had a few scratches in it. Before I got Neils handbook I tried cleaning with 50/50 Metho and Pure Turps. I stopped when it started removing polish in one area and not really evening out. Also I noticed the shellac fogged up a bit which I now put down to moisture content of the metho I was using, the fogging seemed to disappear or at least isn't noticable after it dried. I'm not sure what the next approach should be. Rub pure metho over the surface and see if it will even up. Or will I need to now rub off the old shellac and reapply fresh shellac. I'm assuming the lighter patch I've already created is more a refinish job and not something that can be tackled with reviver.
The second and much larger job is my antique dining setting delivered last weekend. It's also oak and the old carvers show that lovely worn in look on arms. The setting is from an estate and the polish needs a freshen up but I'm now thinking U-Beaut reviver might be all that required before a good wax. I want to clean and bring up the surface buffing out minor scratches but I want the piece to maintain its beautiful aged quality where its more worn showing a more golden oak.
I've only just got into buying antique furniture but prefer the conservation approach where a peice is made functional and servicable versus the restorative approach which can make an antique look indistinguishable from a brand new peice.
So in reference to my fundamental question. When will reviver do the job vs the need for refinishing.
regards
Brian