Reno RSS Feed
7th February 2009, 11:10 PM
Can anyone tell me or point me to a place that specifies what the minimum distance between drilled holds in a joist/beam is when running cables down a wall from the roof without affecting the structural integrity of the joist/beam?
Similarily how big can the hole be compared to the width of the beam/joist?
The plan is to run a few cat6 + coax cables down the wall (each outlet will have about 4xcat6 + 2xRG6 cables.
Appreciate any help.
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/showthread.php?t=75232&goto=newpost)
Similarily how big can the hole be compared to the width of the beam/joist?
The plan is to run a few cat6 + coax cables down the wall (each outlet will have about 4xcat6 + 2xRG6 cables.
Appreciate any help.
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/showthread.php?t=75232&goto=newpost)