WOODWORKING QUIZ for 11 May 04

[Ralph Jones]

Good Morning Mates,
I am looking for a quick simple way to elongate screw holes when I attach a solid-wood top to a piece of furniture.

what would you suggest?

Respectfully, ;)

[bitingmidge]

I just stick a nail in 'em and belt 'em with a hammer.

I may not be cheap, but at least I'm rough.

P

[Tonz]

Use a small round file....

Or one of those drilll saw bits you can buy...

[journeyman Mick]

I use my trimmer with the permanently attached 6mm straight solid carbide bit, I've also drilled two holes side by side and pared thru with a chisel.

Mick

[Bob Willson]

I would think that a really small chainsaw would do the trick nicely. Further accuracy may be achieved by keeping both eyes open.

[Ralph Jones]

Good Evening Friends,
All answers were correct in there own way and Journeyman Mick,
Had the better description of all, of course Bob Wilson had a good idea with the miniature chain saw if you could find one that small.

Thank you for your support.

Respectfully, ;)