ubeaut
16th November 2008, 07:10 AM
The old Xpelair extractor fan in our kitchen threw and chewed a couple of louvre blades, and now rattles. As its over 20 years old it was probably due for replacement anyhow.
The old fan fits a window cut-out of 260mm diameter. A visit to a couple of electrical dealers showed fans to fit a 230mm cut-out, but nothing for a 260mm hole. Putting the smaller fan in provides only about 3mm overlap of the mounting plates over the glass - this seems way too little.
Does anyone know who makes fans to fit a 260mm hole? Or another solution?
Thank you
Graeme
More... (http://www.renovateforum.com/showthread.php?t=73899&goto=newpost)
The old fan fits a window cut-out of 260mm diameter. A visit to a couple of electrical dealers showed fans to fit a 230mm cut-out, but nothing for a 260mm hole. Putting the smaller fan in provides only about 3mm overlap of the mounting plates over the glass - this seems way too little.
Does anyone know who makes fans to fit a 260mm hole? Or another solution?
Thank you
Graeme
More... (http://www.renovateforum.com/showthread.php?t=73899&goto=newpost)