denwol
13th May 2008, 11:17 PM
Hi,
This is my first post so please be patient.
I am wanting to install VJ boards to go about 1050mm up the wall. The panels are MDF panels and are quite cheap. There is old plaster that I am replacing.
I was wondering if I should attach the panels straight to the wall studs(with noggins between the studs) and place the skirts over the panels, installing new plaster above the panels with a decorative wainscot in between.
Or
Should I plaster the whole wall and place the skirts on the plaster with the panels placed above the skirts with the panels attached on top of the plaster.
Thanks in advance
This is my first post so please be patient.
I am wanting to install VJ boards to go about 1050mm up the wall. The panels are MDF panels and are quite cheap. There is old plaster that I am replacing.
I was wondering if I should attach the panels straight to the wall studs(with noggins between the studs) and place the skirts over the panels, installing new plaster above the panels with a decorative wainscot in between.
Or
Should I plaster the whole wall and place the skirts on the plaster with the panels placed above the skirts with the panels attached on top of the plaster.
Thanks in advance