PDA

View Full Version : Waterproofing wet areas















Plastic Fang
11th May 2008, 08:32 PM
Why did I decide to build instead of buy? I should have known there would be a million 'hidden costs' that crop up along the way.

The latest one is waterproofing to wet areas. Apparently it is a legal requirement whereas my last house just had cement sheet on top of the yellow tongue sheet flooring then tiles on top of that.

Now I'm told you have to whack down some type of water proofing muck on top of your particle board floor. Is this correct? I will have a typical sized bathroom, ensuite & laundry. Does anyone know what sort of waterproofing is common and how much should I budget?

Claw Hama
11th May 2008, 10:16 PM
I think mostly now they use a fibreglass water proofing membrane and yes
you definatly need to do it. Tiles grout and glue are not enough to keep it water tight. Sorry not sure of the cost.

rick_rine
11th May 2008, 10:53 PM
I had to do the same about 6 years ago and bought a 10 litre drum from the tile shop. It was in a blue white and red plastic drum and cost about $150. This did a floor 3m x 3m 3 times with some left over. It had fibres in it like fibreglass. Good stuff, easy to use. If you need the name get back to me.
Rick

autogenous
12th May 2008, 01:39 AM
I think mostly now they use a fibreglass water proofing membrane and yes
you definatly need to do it. Tiles grout and glue are not enough to keep it water tight. Sorry not sure of the cost.

Glue manufacturers are quick to point this out.Well a Henry Morgan rep was. :)

Water ingress is one of the cheaper costs that prevent some of the most expensive maintenance issues many near on impossible to fix.

Choose a waterproofing agent suitable for the material you are using.Particle board? Waterproofing or damp proofing wet areas is worth every cent.

Tiles and glue are not water proofing materials.

SilentButDeadly
12th May 2008, 12:47 PM
Fang......just building my bathroom. Ceramic tile underlay over yellow tounge. We are using Bostik Ultra Grip as the membrane (same as what the local builders use)....comes in a sausage (or the usual little cartridge) for the big applicators but you just cut the sausage, slop it out and spread it with a roller. Cost is $15 per sausage. Two or three should do the average wet area....