PDA

View Full Version : colorbond cladding info needd














gg23
3rd May 2008, 12:21 PM
Hi all,
We are installing corrugated colorbond as an external cladding and are confused about the type of flashing that is used where the colorbond meets a window frame. Can a right angle corner be used so that one edge overlaps the exterior of the cladding or does it need to be a U shaped piece.

Thanks
greg
Claw Hama
3rd May 2008, 12:54 PM
Colrbond angle should be fine.
Tools
3rd May 2008, 01:20 PM
Are you talking about along the head, down the sides, or under the sill?

Tools
gg23
3rd May 2008, 01:23 PM
>Are you talking about along the head, down the sides, or under the sill?

Along the sides, but need to think about top and bottom too!!!

greg
Chipman
4th May 2008, 12:32 AM
Hi, Have a look at the attachment, it might be helpful to you.

Good luck with your job!

Chipman:)
gg23
4th May 2008, 10:23 AM
Hi, Have a look at the attachment, it might be helpful to you.

Good luck with your job!

Chipman:)

Thanks chipman, much appreciated. Did you make up the flashing yourself? What about color matching? the iron runs horizontally, so the ends are diffferent to your diagram

greg
Chipman
4th May 2008, 12:51 PM
No, I didn't bend it myself. I would be happy to do little jobs but for this sort of thing your better off getting a company to bend it up for you in the same colour bond as your walling. IE if you used Bluescope or Lysaghts, find a local distributor and they will organise custom flashings for you. Why not get back to the people who supplied you with the sheeting. They will be able to put you in touch with a supplier of custom flashings.

BE QUICK ther is a SUBSTANTIAL price rise coming up in June (june 30 I guess)

Lysaght Distributors
http://www.bluescopesteel.com.au/go/tools-and-resources/supplier-locator

Stratco
http://www.stratco.com.au/stores.asp

Robot Trading
http://www.robottrading.com.au/

If you are running sheets horizontally, it won't make much difference... just turn what I said by 90 degrees. The U shape will still be the easiest. I am sure that if you find a good supplier, they will even help you design your flashings.

Hope this helps,

Chipman

(included a pic of a shed I did several years ago and doing another at the moment)