how to cut fixed stumps please?

[bingoshelley]

hi what is the best tools to use to cut the top of stumps that are set in ground for putting bearers on.i was thinking a circular saw but not sure if they can cut 90mm i want them as square as possible my hubby wants to go with the chainsaw typical male the bigger the tool lol.please let me know thx:)

[echnidna]

I normally use a circular saw, chainsaw is not accurate enough.

[bingoshelley]

thanks i knew i was right its not always the size of the tool lol

[Ivan in Oz]

Out of my Depth here:wink:

What is the 900mm
Diameter or Height of the Stump?

Ivan.....feeling Stumped:D . .:doh::doh:

[bingoshelley]

sorry ivan i meant 90x90 stumps

[BustedThumbs]

I used a chainsaw on all the internal posts, but i wasn't too concerned about having the tops dead square because i housed the bearers into the posts. Just gotta make sure the chain is sharp.

Wouldn't use a chainsaw on kwila posts though. It splinters. Definitely use a circular saw if you want neat.

Good luck.

[Skew ChiDAMN!!]

Circular Saw. :yes:

Just a minor aside... does he also carve the Sunday Roast with an axe?

[bingoshelley]

Circular Saw. :yes:

Just a minor aside... does he also carve the Sunday Roast with an axe?
lol if it saved time and cut corners hed work it out

[SilentButDeadly]

I used my little Stihl chainsaw to cut all 78 of my red gum stumps. No worries with accuracy due to a light saw and a steady hand.

...and well marked cut lines. We were very fortunate to have the use of a self leveling laser level for the day.....great toy.

Could have used the circular saw but it was stuck in the Triton....

[bingoshelley]

just wanted to say thx to everyone for your advice i have 60 stumps to do and will use circular saw once again thx for the help:D:D