Finishes over estapol tung oil

[fcm]

I have a redgum table slab that has been sealed with 3 coats of wattyl estapol tung oil - a durable subdued gloss floor sealant.

To finish it off I have planned to fine sand the estapol up to 1200 grit and use french polish. I've tried a small area on the bottom surface which hasn't shown any immediate problems.

Does anyone know if there would be adhesion or other problems with this application?

[Roger Peine]

Mate. I'm not familiar with estapols Tung oil however, i have used tung oil (Cabots & Ruskins) under shellac (Normal practice) with great results...