Problems during stud adhesive application on battens

[kyaw19]

Hi all,

Just wanted to know if anyone is having problems or difficulties during operation when applying stud adhesive for plasterboard to batten installation....

Thanks

Kyaw

[ozwinner]

Hi and welcome

More info is needed, timber or steel battens?

Al :)

[kyaw19]

Steel battens.

[rod@plasterbrok]

It shouldn't be difficult?? What sort of problem are you having?

You should apply walnut size daubs with a small joint knife. Sometimes if the adhesive is a bit wet the daubs can fall off the battens a bit. In which case you need to spread it a bit as well, to take hold of the batten. Just make sure you still have about 20mm depth of adhesive on the batten.

Cheers