Sime
17th June 2003, 02:29 PM
Hi All,
Have finally stumbled across this site - where have you been all my life.
I am about to make kitchen doors etc in Tas Myrtle and would like advice on what you all would recommend as the best finish to use.
I am planning to use two coats Wattyl matt estapol then rub in some Wattyl Scandanavian Teak oil which has given me good results in the past, but any correction would be greatfully accepted.
Thanks
Sime.
Have finally stumbled across this site - where have you been all my life.
I am about to make kitchen doors etc in Tas Myrtle and would like advice on what you all would recommend as the best finish to use.
I am planning to use two coats Wattyl matt estapol then rub in some Wattyl Scandanavian Teak oil which has given me good results in the past, but any correction would be greatfully accepted.
Thanks
Sime.