PDA

View Full Version : Estapol on Huon Pine Problem















Bill.B
11th February 2007, 12:49 PM
Hi,

This is my first post. I hope this is in the right section.

I have been applying estapol to huon pine. Each time I do it bubbles. I know this is because of the high oil content.

Does anyone have a solution on reducing the oil so that the estapol can take to the wood.

Bill

Paws
11th February 2007, 02:24 PM
I am definitely no expert at finishing huon pine but I worked for a furniture company a while back and we had the same problem with the danish oil not drying on a huon pine table. The solution the finishers there came up with was to seal the huon pine with shellac then apply the danish oil over the top.

ozwinner
11th February 2007, 06:19 PM
I have been applying estapol to huon pine.

Bill

You heathen, Poly on Huon!!?? :o:o:o:o:o:o

Al :C

mongrell
11th February 2007, 09:21 PM
used single pack laquer on huon a fair bit and just did a stump with organ oil ,both no probs

soundman
11th February 2007, 09:30 PM
:o :oo: :o :oo: A blasphemer...... arrrrrrrrgh...... send round the inquisitors quik:D :D :D

common problem with lots of timbers and finishes.

gota seal it.

cheers

ubeaut
12th February 2007, 12:46 AM
Also try washing the whole thing down with metho before applying glue or finish. Both will work much better.