View Full Version : acid etch before painting concrete slab (workshop)?
JDub
4th January 2007, 09:28 AM
I have just (4 weeks ago) had a new slab for my workshop laid and wish to paint it before the shed goes up.
I am just using grey paving paint.
Is it necessary to acid etch the slab prior to painting?
I understand this roughens the surface so the paint can bond.....
I want to acheive a smooth surface so dust etc can be swept easily (hence the painting) so if I acid etch will this defeat the purpose of painting in the first place or will the paint finish create a smooth surface again?
I really just wanna paint the flaming thing as it is.... so tell me its not necessary :wink: :doh:
echnidna
4th January 2007, 09:46 AM
Don't think its necessary.
What do the instructions on the paint can say?
Guy
4th January 2007, 10:05 AM
Yes, you will indeed need to acid wash the slab, then put a sealer on before the paving paint. I would not be in such a haste to paint it there is still a lot of moisture content in the slab which needs to get out somehow.
JDub
4th January 2007, 10:38 AM
Don't think its necessary.
What do the instructions on the paint can say?
acid etch first :rolleyes: but I dont want to roughen the surface, this defeats the purpose of painting it in the first place
Bleedin Thumb
4th January 2007, 10:45 AM
JDub, I have never acid etched a slab before painting and have never had paint lift and I am talking about public spaces too.
Mind you I always use top quality paving paints from NuTech.
Even when I paint the inside of water features I don't acid etch, but once again I use good quality epoxy/polymer paints
JDub
4th January 2007, 10:48 AM
I would not be in such a haste to paint it there is still a lot of moisture content in the slab which needs to get out somehow.
I was going to do it not this weekend but the following one, that makes 6 weeks since the slab went down and its been pretty hot lately :wink: , I was told 6 weeks should be fine......? I wanted to do it before the shed went up.... alot easier that way :)
JDub
4th January 2007, 10:52 AM
JDub, I have never acid etched a slab before painting and have never had paint lift and I am talking about public spaces too.
Mind you I always use top quality paving paints from NuTech.
Even when I paint the inside of water features I don't acid etch, but once again I use good quality epoxy/polymer paints
Bleedin,
Are you talking about the two part systems or just standard paving paint?
When looking into it originally, I thought the two part systems would be a bit of an overkill for a backyard workshop floor.......
Joel
Bleedin Thumb
4th January 2007, 12:15 PM
Hi JDub,
Just spoke to Nutech and they always recommend acid etching. So don't listen to me.
They also recommend thinning the first coat, this I do.
They have a product called pavecoat, a urathane one, a waterbased 2 pac paint and a one pac epoxy.
I usually use the pavecoat and you can get it in any colour you wish, which is a bonus as I dont think that the Bunnies paving paints can be tinted...I may be wrong though.
I guess that as my work is outside the paving usually gets a water blast before painting which would take that thin sheen of concrete off the surface. I dont think you will be waterblasting in your shed so it may be better to follow the instructions even if this may be a code violation.
I wouldn't worry too much about the acid wash roughing up the slab too much, wet the slab well before you start, keep the batch weakish and dont leave it on too long.
I would be concerned about it being too smooth, you may want add antislip beads to your paint.
jaspr
4th January 2007, 02:07 PM
I put paving paint down on a concrete slab for my workshop. It works well - except where I drop something on it and it chips.
It was not acid etched - but it was 15 years old and did have a coat of sealer on it once.
SilentButDeadly
4th January 2007, 02:32 PM
I sealed my new shed floor about 8 months ago. The concrete was less than week and a half old. Couldn't be stuffed painting it, was more worried about dust and stains........
I used the Crommelin concrete floor sealer,available from Bunnings. If you want it can be tinted using the Crommelin floor stain too. All the info is here http://www.crommelin.com.au/listPro.php?id=6
JDub
9th January 2007, 11:24 AM
For the record, I acid etched the slab on the weekend.
I just used a commercial product from the hardware store and followed the instructions on the tub... sorry for the code violation (thats two in one week :B )
I dont know that its made a huge (hardly any really) difference to the texture of the slab to be honest but at least now I can say I did it properly.... and now I have the right to bitch and moan if the paint lifts :cool:
I will paint it on the weekend.
Joel
DJ’s Timber
9th January 2007, 11:56 AM
G'day Joel
Good to hear some movement happening, I have stalled on mine for the moment, suppose I could put the spouts ups :roll:.
LeoAU
10th January 2007, 10:00 AM
For the record, I acid etched the slab on the weekend.
Joel
Ops, you've done it already. The guys at Bunnings told me it is really necessary only when you paint really used up concrete surface - like a driveway with lots of oil stains. So, to remove the stains, even the toughest ones that acid thingy is used.
They also told that stuff stinks badly. :D
Border boy
10th January 2007, 10:07 PM
JDub,
I'm currently researching paving paints etc. You did the right thing by acid etching. Acid etching apparently dissolves "latience" which I understand to be a thin layer of weak, powdery concrete that rises to the surface of a new slab during the curing process. Paint won't stick properly to it. So you're good to go. By the way, are you using a water based or solvent based paint?
Cheers.
scooter
10th January 2007, 10:28 PM
Oil based paving paints are reputed to still be better than water based, just not quite as user-friendly (cleanup, etc)
JDub
11th January 2007, 11:00 AM
JDub,
I'm currently researching paving paints etc. You did the right thing by acid etching. Acid etching apparently dissolves "latience" which I understand to be a thin layer of weak, powdery concrete that rises to the surface of a new slab during the curing process. Paint won't stick properly to it. So you're good to go. By the way, are you using a water based or solvent based paint?
Cheers.
I was actually walking out on the slab yesterday and noticed much of it was covered with a very fine concrete dust from the etching process.... so yep its probably done more than can be seen with the naked eye, I am glad I wasnt as lazy as I normally am and actually did it ;)
Im using solvent based, Its White Knight brand (I think) Paving Paint.... clean up in turps... but I have a fair few old rollers so I reckon it will paint then chuck the roller... :rolleyes: :2tsup:
I will post a pic in my Shed WIP thread (http://www.woodworkforums.ubeaut.com.au/showthread.php?t=34677&page=6) next week once I have painted it.
Cheers
Joel