PDA

View Full Version : Concrete floor uneven for tiling















troy 2
29th December 2006, 06:27 PM
Hi,
I Have a patio that i wish to tile but the floor was poured in two sections and the last is higher by about 20mls in the middle.
Would a Tile Levelling Compound fix this problem.
Many Thanks
Troy2

scatty56
29th December 2006, 07:33 PM
20mm is outside the scope of these floor levelling compounds. The joint will also crack the tiles eventually.

myla
29th December 2006, 08:07 PM
hello,

best to do a sand and cement screed, fairly dry mix

I would also put an expansion joint where the joint is

regards
myla

troy 2
31st December 2006, 12:04 PM
20mm is outside the scope of these floor levelling compounds. The joint will also crack the tiles eventually.
What is the maximun height you can use this product for.
Thanks
troy2