watson
13th December 2006, 03:14 PM
G'day All,
I've been having real trouble accurately mounting barrel hinges in small box lids or anywhere. I tried "story sticks" but still got inaccurate transfer of the hinge position, particularily with 5mm hinges. I thought of dowell markers, but the nearest size hole they fit is 6mm.
So here's how I made 6mm dowell markers fit a 5mm hole.
1. Centre marked a 50mm length of 19mm dowell.
2. Using superglue, mounted the pointy end of a 6mm dowell marker into the centre mark on the dowell.
3. Mounted the dowell into the scroll chuck of my wood lathe.
4. Whilst holding my breath (as usual) I set the lathe going and used a bastard file to grind the 6mm bit that goes into the hole down to 5.5mm
( take a breath) down to 5.2mm (one more breath) and finally down to 5mm.
5. Did another one, and tested the transfer of two 5mm hole positions to another bit of wood.
6. It worked.
Hope this is helpful to someone else too.
Regards,
Noel
I've been having real trouble accurately mounting barrel hinges in small box lids or anywhere. I tried "story sticks" but still got inaccurate transfer of the hinge position, particularily with 5mm hinges. I thought of dowell markers, but the nearest size hole they fit is 6mm.
So here's how I made 6mm dowell markers fit a 5mm hole.
1. Centre marked a 50mm length of 19mm dowell.
2. Using superglue, mounted the pointy end of a 6mm dowell marker into the centre mark on the dowell.
3. Mounted the dowell into the scroll chuck of my wood lathe.
4. Whilst holding my breath (as usual) I set the lathe going and used a bastard file to grind the 6mm bit that goes into the hole down to 5.5mm
( take a breath) down to 5.2mm (one more breath) and finally down to 5mm.
5. Did another one, and tested the transfer of two 5mm hole positions to another bit of wood.
6. It worked.
Hope this is helpful to someone else too.
Regards,
Noel