occam
3rd October 2006, 09:01 PM
Last summer I bought and installed a small Mistral split system, after reading on this forum how easy it was. Unfortunately, it seems that I have a small leak somewhere - the unti got less efficient and finally stopped producing indoor cooling at all.
I have tried, and failed, to get a "proper" installer to vacuum (and leak test) and add refrigerant if needed. No - they insist on selling a new $1000 system and charge $770 for a complete new install.
However, vacuum pumps (advertised to suit air conditioning units) are $200 to $300 on eBay. So I am considering DIY for the maintenance. I can even buy a second unit and still come out ahead.
I would also need refrigerant, some way of measuring how much is needed - and how much I put in. And, of course, some 'how-to' do it.
Has anyone done this type of DIY job, and can give some hints on how I should proceed? What have I forgotten?
I have tried, and failed, to get a "proper" installer to vacuum (and leak test) and add refrigerant if needed. No - they insist on selling a new $1000 system and charge $770 for a complete new install.
However, vacuum pumps (advertised to suit air conditioning units) are $200 to $300 on eBay. So I am considering DIY for the maintenance. I can even buy a second unit and still come out ahead.
I would also need refrigerant, some way of measuring how much is needed - and how much I put in. And, of course, some 'how-to' do it.
Has anyone done this type of DIY job, and can give some hints on how I should proceed? What have I forgotten?