Sliding Door Installation - Vantage

[DOZ]

Hi all,

Stupidly I have assumed the Sliding Door I purchased from a local supplier would have come with an instal manual. It didn't. I have looked on the Vantage website but the link doesn't work. I found the stegbar one is quite good but the bits mine came with don't match anything so I can't really make any sense this way.

Anyhow, if anyone has a copy of the manual or knows where to find it I would appreciate as I need to put the thing together tommorow.

Cheers

Daniel

[Shaun04]

Is it a cavity or external slider?

Cavity sliders SUCK to install if youve got 45mm nails. External sliders are easy to do, tell me which one and i might be able to give you a run down.

[DOZ]

Its an aluminium external door same as this

http://www.vantagealuminium.com.au/images/sliddr5.jpg

The problem is not the door into opening detail, it's the actual sliding/fixed door instal bit I need. I know how some of the parts go in but there are two odd shaped bits in particular I need to find out about.

Cheers

Daniel

[Barry_White]

Its an aluminium external door same as this

http://www.vantagealuminium.com.au/images/sliddr5.jpg

The problem is not the door into opening detail, it's the actual sliding/fixed door instal bit I need. I know how some of the parts go in but there are two odd shaped bits in particular I need to find out about.

Cheers

Daniel

Post a pic. of the parts and we might be able to help.

[Barry_White]

Have a look here this might help in PDF Format.

http://www.vantagealuminium.com.au/cgi-bin/manual.pl?doc=71series.pdf