Review - GMC Laser Tile Cutting Saw

[Dean]

http://onlinetoolreviews.com/reviews/gmcLSTSAWtilecutter.htm

Hope it helps.

Dean

[atregent]

Thanks for that Dean, the review couldn't have come at a better time.

I picked up one of these from Bunnings yesterday, and apart from getting me a little wet, it worked like a charm.

The only problem I found was that it's had to keep the water up to the recommeded level. I'd fill it up, cut a couple of tiles, and I'd have to top it up again. So, not really much of a problem, but something to keep an eye on. Should be easy enough to rig up some sort of reservoir system though.

But, all in all, I'm very happy with my purchase!

[Dean]

Hi mate,

yeah. i noticed if you keep the blade guard right down so it just clears the tile surface, then a lot of the water falls back down underneath and water loss is not as bad :)

[shaunm]

i had a look at one at my local bunnings thought the laser line was a good idea but looked very cheaply built

[rod1949]

What I would be wary of is having to push the tile to the saw. I would imagine the bench top will eventually become rough making it hard to push the tile.