PDA

View Full Version : Glass /Mirror edge bevel















John Saxton
12th November 2002, 08:45 PM
Have any of you Knowledgeable folk out there had any personal experience in chamferring/bevelling a Glass/mirror edge?

If so what is involved?

TIA Cheers http://ubb.ubeaut.com.au/ubb/smile.gif


------------------
Johnno

Jim Carroll
12th November 2002, 11:21 PM
John there is a crowd in Geelong that do the beveling on a machine like a router with a diamond head they do not recommend it for anyone who does not know what they are doing as you can waste a lot of glass.

------------------
Jim
One Good Turn Deserves Another

John Saxton
13th November 2002, 08:24 PM
Thanks Jim,I didn't think that there would be simple means but wondered all the same.
I have a 6' mirror that I want to place in a chevel stand.
It looks like a trip to Perth is on the cards.
Cheers http://ubb.ubeaut.com.au/ubb/smile.gif

------------------
Johnno

Mick4412
14th November 2002, 06:22 PM
John,
Like Jim said, bevelling appears to be a bit more difficult especially without the right tools.
I deal with a good glass man in Melbourne. He said I would be wasting money , trying to edge, polish or bevel glass without the right equipment. And when you get into the thicker glass, the problem is compounded.
As a guide, he did a piece of glass mirror for me, when I first went to him. About 30cm square - $10 for the mirror , an extra $25 for the bevelling.
I am sure he would do it at a better price now that I know him and go there regularly, but it adds to the cost. Even having the edges polished costs me $5 a metre
Cheers
Mick

John Saxton
15th November 2002, 08:18 PM
Thanks Mick,it still looks like a trip to Perth to sort this out.
Mirror came out of an old wardrobe and I thought with the bevelled edges it would sit nice in a Cheval type of bedroom furniture.
Cheers http://ubb.ubeaut.com.au/ubb/smile.gif

------------------
Johnno

Iain
16th November 2002, 08:13 AM
I stumbled on a US site about a year ago on how to bevel glass with a router, if you find it don't try it, unless you have a 10 metre push stick, a big screen to hide behind and a deathwish.
Apparently this is suicide and I wonder about the people who post this useless/dangerous garbage.

Mick4412
17th November 2002, 07:03 AM
Johnno, before you go tp Perth, have a think about the "width" of the bevel you put on the mirror.
The piece (30cm square) I referred to earlier - I had a 25mm bevel put on it. It was for an Edwardian HallStand I was restoring. If I was to do it again, I would make the bevel a little narrower - purely for aesthetic reasons
Mick

diuu
13th April 2007, 09:32 PM
Can anyone give me address for glass beveling in melbourne, VIC.

peter_sm
17th April 2007, 12:45 AM
What area of Melbourne? Most glaziers will be able to help you and they are located in lots of places.