PDA

View Full Version : Bathrom Mofo Is Back!!!















drummelars
31st July 2006, 09:32 PM
well people here it is ive started to do the bathroom and rip out the sower and tiles . Tiles where falling off at the base and water was getting down underneath and behind the tiles lucky i stopped using the shower as my fears of water damage are correct.

Now is the hob part of the shower in picturee below CONCRETE I tried to break the tiles off but it was like hitting a brick wall. Whats the best way to remove the tiles and break the concrete hob down as my shower is going to be a hobless walk in shower????

Umntil next time

http://users.tpg.com.au/jselmes/bathroom/01.jpghttp://users.tpg.com.au/jselmes/bathroom/02.jpghttp://users.tpg.com.au/jselmes/bathroom/04.jpghttp://users.tpg.com.au/jselmes/bathroom/05.jpg

drummelars
31st July 2006, 09:34 PM
http://users.tpg.com.au/jselmes/bathroom/09.jpghttp://users.tpg.com.au/jselmes/bathroom/10.jpghttp://users.tpg.com.au/jselmes/bathroom/11.jpghttp://users.tpg.com.au/jselmes/bathroom/12.jpghttp://users.tpg.com.au/jselmes/bathroom/13.jpg

Guy
31st July 2006, 11:46 PM
To break the shower wase up you will need an FBSH and a pair of ear plugs for the rest of the household and a decent pair of safethy glasses. A few good blows with the FBSH should break it up easily.
Alternatively hire a small jack hammer from your local hire shop ( about $90 for a weekend)

drummelars
1st August 2006, 08:54 AM
whats an FBSH????

pau1
1st August 2006, 03:20 PM
whats an FBSH???? I'm going to assume it's somthing like a "Flaming Big Sledge Hammer":p

drummelars
1st August 2006, 03:37 PM
ahhhh good idea

Guy
1st August 2006, 07:37 PM
thats it, but i would have said something else instead of Flaming.

The Apprentice
1st August 2006, 08:09 PM
I often get given this job at work....


Like the other guy said.... get some ear protection... some gloves square mouth shovel... wheelie bin and the biggest motha of a sledge you can swing..

And go to a hire shop and get a good size demolition hammer with a spade bit so you can bust up whats left of the hobb after you have beaten it to death..


You'll get the idea once you start swinging, bust up a few on the floor first and work from that edge out. Like punching a hole in ice and continue busting out the edges to make the whole bigger!

Anyway its hard work but just go for it... you have to get in the zone....:)