Hickory
23rd July 2006, 12:02 PM
Recently folks have been asking how to identify finishes, well today I saw in the Newspaper, this tidbit of info... After reading it I thought, "That is what I do" so I thought I'd pass it on for some readers.
Working a few drops of boiled Linseed oil into the wood in an inconspicuous spot. If the oil is absorbed, it is an oil finish. If it beads up, it is a hard finish.
What kind of hard finish?
Rub some Acetone into the finish....
If it Sheds like water, its Polyurethane.
If it dissolves in 30 seconds with some rubbing, it's Lacquer.
If the finish turns into a sticky gel, it's varnish or shellac. To find out which, take a cotton swab dipped in Denatured Alcohol and apply to the finish. If the finish dissolves quickly, it's Shellac. If the reaction is slow, it's Varnish.
Of course this doesn't include Water Borne finishes, I'm not too sure on how to approach them, except I know Alcohol dissolves to a certain extent. Anyone got a fool proof way of identifying WB?
Working a few drops of boiled Linseed oil into the wood in an inconspicuous spot. If the oil is absorbed, it is an oil finish. If it beads up, it is a hard finish.
What kind of hard finish?
Rub some Acetone into the finish....
If it Sheds like water, its Polyurethane.
If it dissolves in 30 seconds with some rubbing, it's Lacquer.
If the finish turns into a sticky gel, it's varnish or shellac. To find out which, take a cotton swab dipped in Denatured Alcohol and apply to the finish. If the finish dissolves quickly, it's Shellac. If the reaction is slow, it's Varnish.
Of course this doesn't include Water Borne finishes, I'm not too sure on how to approach them, except I know Alcohol dissolves to a certain extent. Anyone got a fool proof way of identifying WB?