View Full Version : Finishing Western Red Cedar
MikeK
5th April 2006, 06:06 PM
Hi,
I'm making a chest of drawers with the insides being made from WRC. How should I finish them (if at all)?
Regards,
Mike.
echnidna
5th April 2006, 10:49 PM
I would leave the internals bare.
WRC is aromatic and will keep moths and silverfish away.
MikeK
5th April 2006, 11:17 PM
Thanks Bob. That was my instinct as well. I just wanted to see if others had done something different.
Regards,
Mike.
Ashore
5th April 2006, 11:29 PM
a wattyl stain under to give the timber a good lustre then on the exterrnals Wipe on poly several coats with good 600 grit sanding between coats
How I would do it , but the internals , natural timber as echnidna says keeps the moths away,. and smells good as well