greenie512
2nd April 2006, 11:19 AM
From my last few speaker projects I’ve been finishing off the veneer with Organoil’s Interior simply wiped on and I’ve been reasonably happy with the results. <o></o>
Someone gave me some iron-on veneer a while ago but this freebie turned out to be a dud and the end results were pretty bad, so this week I re-veneered the cabinets but finished off with two “float” coats of oil using 600 wet/dry on the orbital. Now being pretty inexperienced at finishing I was pleasantly surprised (1) how easy this is and (2) final silk smooth finish.
Promise to try some U-Beaut products on next new project.
http://www.greenie512.net/greenie512/assets/images/CAOW1_Rev01.jpg
http://www.greenie512.net/greenie512/assets/images/CAOW1_Rev02.jpg
Someone gave me some iron-on veneer a while ago but this freebie turned out to be a dud and the end results were pretty bad, so this week I re-veneered the cabinets but finished off with two “float” coats of oil using 600 wet/dry on the orbital. Now being pretty inexperienced at finishing I was pleasantly surprised (1) how easy this is and (2) final silk smooth finish.
Promise to try some U-Beaut products on next new project.
http://www.greenie512.net/greenie512/assets/images/CAOW1_Rev01.jpg
http://www.greenie512.net/greenie512/assets/images/CAOW1_Rev02.jpg