View Full Version : Shonky workmanship
Wongo
27th February 2006, 10:16 AM
Can you see something wrong with the air conditioner?
Hint: every time it rains heavily, we get excessive water leaks into the house. We always thought that it was the gutter but it wasn’t.
Clinton1
27th February 2006, 10:18 AM
You called?
DavidG
27th February 2006, 10:48 AM
Lets guess.
Sloping ac prevents water draining from centre drain resulting in water build up in down hill edge which leaks to the inside of the house.:confused:
Solution. Drill a hole in the bottom edge.:D
Wongo
27th February 2006, 11:17 AM
No, it is something very basic.
C'mon first one gets it right receives a greenie.
chrisp
27th February 2006, 11:20 AM
The water is comming through the vents on the side when it rains?
Chris
Zed
27th February 2006, 11:24 AM
the bog (sealant) on the aircon that seals the unit to the wall "doesnt" - either perished, not waterproof or something like that.
Wongo
27th February 2006, 11:26 AM
The water is comming through the vents on the side when it rains?
Chris
correct
Felder
27th February 2006, 11:28 AM
Looks to me like the vents down the side are facing the wrong way:eek:. So either your hole AC unit is upside down (but I'm figuring you would notice that on the inside of the house) or the casing on the back has been put on upside down.:confused:
Am I close?
Felder
27th February 2006, 11:30 AM
Oh sod.
Chris beat me to it:(
aju
27th February 2006, 11:31 AM
First problem - The AC is located under a downpipe/guttering so in heavy rain the guttering may overflow onto the AC. Second problem is the angle of the AC means that the water accumates inside the unit and flows back into the house. Do I get a greenie?
elphingirl
27th February 2006, 11:31 AM
The vents look very much like they were installed - or maybe the whole unit - upside down.
Cheers
Justine
elphingirl
27th February 2006, 11:33 AM
Oh sod.
Chris beat me to it:(
Ditto - can we all get a greenie?
Wongo
27th February 2006, 11:33 AM
.
craigb
27th February 2006, 11:37 AM
Why is the unit mounted on a 45 degree angle? :confused:
Felder
27th February 2006, 11:40 AM
Hey Wongo! Some bustard has drawn all over your house since your first photo! I hate graffiti - so inconsiderate.
:p
Felder
27th February 2006, 11:44 AM
Why is the unit mounted on a 45 degree angle? :confused:
Nah - the AC is fine. I think the wall is on an angle.
Wongo
27th February 2006, 12:03 PM
Now I am confused!!:confused:
Just went outside to look at the other 2. The vents face up on side and down on the other side. Shouldn’t it be facing down on both sides?? Clearly they are made that way but why so? Heavy rain in Sydney like last night will fill it up very quickly and the hole at the bottom doesn’t work fast enough.
Does anyone have an explanation?
Also my apologies to the electrician who installed them years ago.:o
chrisp
27th February 2006, 12:07 PM
Wongo,
I'd guess it is a faulty unit - mis-stamped at the factory?
Chris
ps. Thanks for the greenie :)
Wongo
27th February 2006, 12:17 PM
Oh, I might have to cover it with something otherwise it will keep happening.
elphingirl
27th February 2006, 12:19 PM
Good luck with it Wongo - ta for the greenie!
Cheers
Justine
Jacksin
27th February 2006, 12:44 PM
Just went outside and looked at my Kelvinator and the side vents are stamped one up the other down, but as its under the eaves and installed level there is no problem.
bitingmidge
27th February 2006, 01:48 PM
Why is the unit mounted on a 45 degree angle? :confused:
Everyone knows that airconditioning is most efficient run at 24°, perhaps they were trying to double the efficiency?
P
:rolleyes:
Zed
27th February 2006, 02:00 PM
Everyone knows that airconditioning is most efficient run at 24°,
P
:rolleyes:
is that true Balding Midge ? I assume wrt cooling efficiency on the machinary it may be, but on a hot day 24 deg is still too freaking hot....
DavidG
27th February 2006, 02:33 PM
Wongo
Go back and look at my first reply.
Does not matter where the water comes from, it can not get out with the drain hole above the water.:rolleyes:
Dave..
Wongo
27th February 2006, 09:05 PM
But David the drain hole isn't above the water.:confused:
Caliban
27th February 2006, 09:08 PM
But David the drain hole isn't above the water.:confused:
Scott
It will be when you rip the ugly, wonky, badly made pos out and use it for an anchor.
Wongo
27th February 2006, 09:21 PM
Just went outside and looked at my Kelvinator and the side vents are stamped one up the other down, but as its under the eaves and installed level there is no problem.
Thanks Jack.
Still dont know why though.
woodbe
27th February 2006, 09:35 PM
Only think I can think of is that it's an attempt to stop the AC from recirculating the heated air back through the coil by creating non-symetrical airflow patterns on each side of the unit.
In any case, it's daft...
woodbe
DavidG
27th February 2006, 09:42 PM
Oh.:o
On mine the drain hole is in the middle of the bottom.
Thought yours would be similar.
Ashore
27th February 2006, 09:49 PM
Time for a little awning me thinks :cool:
Rgds
Wongo
27th February 2006, 10:05 PM
Maybe I should get up there and have closer look on the weekend. There was so much water coming out and it ran all the way to the bottom floor. Will also check if the drain hole is blocked or even drill a few more holes like David suggested.
Will keep you posted. Thanks team.:)
Auld Bassoon
27th February 2006, 10:10 PM
Hi Scott!
Sounds that you had the torrential rain that we had on Saturday down here in Melbourne on Saturday afternoon.
My A/c was fine, but the N/e end of the shed got a bit of an involuntary sluicing....
Cheers!