Lawn Levelling Tool

[Just_Me!]

Hi all,

Apologies if I have not looked hard enough for the answer but here I go.

I am looking at levelling my very bumpy lawn... and looking at lawn levelling tool.

Looking for recommendations here on which one to get here in Australia?

I would like to buy it once and buy it right but at the same time, conscious at not spending too much on something I may use perhaps once a year only.



Thank you very much.

[havabeer69]

remember you want to be searching for "levelling lute" or "soil spreader"

but depending on the size of your lawn.... but I bought this one from bunnings and seems to work well enough, but obviously a BIGGER one will do the job quicker. Or if you're handy enough you can just make one.
https://www.bunnings.com.au/cyclone-top-soil-spreader_p3361061

the have another one thats about half the price but seemed really crappy when I saw it in the shop vs the wooden handled one. plus its bunnings, can always use it and take it back saying it was crap and get a refund. I think there are some other aussie made ones out there but price was higher, but being a bigger tool would do the job quicker/more accurate.
https://allett-au.com/products/lawn-lute-750mmx250mm?srsltid=AfmBOoojFlZmNMYhW1-QfDgguGicIkPabJgiq4Sgyrjys6U9B3RxGacB


other then that can always just bolt/weld some angle iron together and make your own



paddocks and large area's seem to just tow a pallet or bed frame around

[Just_Me!]

remember you want to be searching for "levelling lute" or "soil spreader"

but depending on the size of your lawn.... but I bought this one from bunnings and seems to work well enough, but obviously a BIGGER one will do the job quicker. Or if you're handy enough you can just make one.
https://www.bunnings.com.au/cyclone-top-soil-spreader_p3361061

the have another one thats about half the price but seemed really crappy when I saw it in the shop vs the wooden handled one. plus its bunnings, can always use it and take it back saying it was crap and get a refund. I think there are some other aussie made ones out there but price was higher, but being a bigger tool would do the job quicker/more accurate.
https://allett-au.com/products/lawn-lute-750mmx250mm?srsltid=AfmBOoojFlZmNMYhW1-QfDgguGicIkPabJgiq4Sgyrjys6U9B3RxGacB


other then that can always just bolt/weld some angle iron together and make your own



paddocks and large area's seem to just tow a pallet or bed frame around


Thank you very much! I am also looking at the same Cyclone one from Bunnings too.

Making one is easy enough - issue is by the time I get materials, it'll easily be half the cost for mild steel and a lot more in stainless... add to that the time to weld it together, not sure it's worth it really.


I also came across the other ones online but for a lot more money too.