PDA

View Full Version : kitchen cabinet hinges















ajm
21st June 2023, 12:46 PM
one of our kitchen cupboard hinges has snapped and it had nothing to do with the teenager leaning on the door looking for snacks in the pantry. I can't figure out which replacement hinge(s) to get. The broken one appears to be a full overlay hinge and is stamped with "GRASS" and 220M.

it is from the overhead cupboard above the fridge.

is anyone familiar with hinges enough to tell me what I should be looking for? I'll add some pics at lunchtime.

China
21st June 2023, 03:53 PM
Grass is partnered with Hafele, take the hinge to a Hafele dealer e.g. Lincoln Sentry and they should be able to match it.


243 Bradman Street, Acacia Ridge, 4110

ajm
21st June 2023, 04:10 PM
Grass is partnered with Hafele, take the hinge to a Hafele dealer e.g. Lincoln Sentry and they should be able to match it.


243 Bradman Street, Acacia Ridge, 4110

good to know. thanks for that. i'm on the other side of brisbane so i'll look for one up this way.

rambunctious
25th June 2023, 08:27 AM
good to know. thanks for that. i'm on the other side of brisbane so i'll look for one up this way.

Bit late I know and depending where you are located, but I used to get any cabinet hardware from Aljay Cabinets at Brendale

ajm
26th June 2023, 02:03 PM
thanks all.

diegoaze
5th January 2024, 11:37 PM
Have you ever found the hinge you were after?

I am in a similar position at the moment, and can't seem to find the Grass 220M hinge anywhere. Have been to Bunnings at least 5 times now trying different hinges with no luck. I have also reached out to Kingswood Cabinets, which installed the cabinets back in 2016. They stopped using this model and have none in stock.

Tried Hafele as well, and they were kind enough to send me two different options free of charge. Unfortunately, neither of them fit. I then went to GalvinHardware, but the model they mentioned (link below) isn't quite what I need:

Galvin Hardware (https://www.galvinhw.com.au/grace2/product.php?pid=20207) ( the hole on the hinge plate are not in the middle of the plate, which is the case on the 220M.

Trying my last bit of luck here, before making additional holes everywhere to get this fixed.

jack620
6th January 2024, 08:32 AM
...the hole on the hinge plate are not in the middle of the plate, which is the case on the 220M.

Trying my last bit of luck here, before making additional holes everywhere to get this fixed.

If I understand you correctly, you will just need to drill two new holes for each hinge plate?

diegoaze
25th January 2024, 10:29 PM
I would need two new holes for the hinge plates on the cabinet wall, and another two for the hinge itself on the door, and away from existing holes...

In any case, I managed to find the Grass 220M hinges from Nikpol in Eagle Farm. Problem solved!