Stephen

[Steph1]

Hi folks
l am retired and involved with a couple of sheds one is with AMSA and the other in the village I live in. I am an electrician and mostly end up with the repairs or special build jobs around the shed. I tend to project manage things and call on special expertise to get the job done. We are currently investigating better dust control and isn’t that complicated.

[Tonyz]

wait till you start wading through the dedicated dust section in this mighty forum

welcome anyway.

[crowie]

G'Day & Welcome to a top forum "Stephen".....
There are quite a good few members around Hunter region and cross NSW plus the rest of the country.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork......
Cheers crowie

PS - On your Dust Collection Issue, check out the series of posts from Bobl

Dust collection article in Australian Woodsmith issue 96 (https://www.woodworkforums.com/f200/dust-collection-article-australian-woodsmith-issue-96-a-158416)

DRAFT Ducting Recommendations (https://www.woodworkforums.com/f200/draft-ducting-recommendations-232898)

The Generic 2HP DC (https://www.woodworkforums.com/f200/generic-2hp-dc-171247)

[Steph1]

Thanks folks Bobs posts is what attracted me to the forum

[BobL]

Welcome.

I note you have asked for pictures in the Ducting FAQ thread.

Most of the posts you say need pictures do have pictures but you're not permitted to see them until you have made a few more posts

[JJF]

welcome aboard

[Steph1]

Welcome.

I note you have asked for pictures in the Ducting FAQ thread.

Most of the posts you say need pictures do have pictures but you're not permitted to see them until you have made a few more posts

I know you need to know I’m not sure what I need to say in a post. I’m still having trouble navigating the whole site I am having trouble going back. It’s frustrating me having to start all over again.

[Steph1]

Am struggling to navigate let alone post
I understand some trust is needed

[ubeaut]

Hello Stephen

No reason why you can't view photos now, as you are currently fully registered. Will send you a PM (private message) with more info. You will see that you have a message when you log in. Access through notifications top rh side of all screens on the forums.

Cheers - Neil :U

[Steph1]

Thanks Niel

[Peter_AUS]

Hi Stephen, I'm new here too but am familiar with the software. When in a particular part of the forum. If you want to go back into the same forum section you are reading posts. Go to the top and you will see a little house o the left hand side then the word Forum. There will be other headings for different levels of the forum. The system is like a tree. Forum of the house is the top of the main branch, then each forum section is another branch off of the main branch. In each sub forum then there are sub branches. So you are moving along a branch selecting other branches/sub forums as you go. Or you go directly to each by selecting the words of the subforum you want. So at the top there is a lengthy l8ne of words depending on how deep into the tree branches you go. To go back select the heading of the branch you want. If it's the one you just read a post, or posted, then that should be the last selection along the line.

Hope that makes sense and answers your statement.

[old1955]

Welcome to the forum.