whats going on with the 'Homemade tools and jigs' area?

[Trav]

I went there to look up crosscut sleds for my triton (time to build a new one as my old, pre-ww forum sled somehow fell off my bench and onto the floor and broke). But there are only 22 threads, not the 391 that it says on the index page.

Have we lost the other pages? Sturdee must have at least 22 of his own and it would be a shame if they had disappeared.

Or perhaps it is just me.

Help! I want to make an end grain chopping board this weekend and I want to make a new sled for the cuts.

Trav

[silentC]

He's right!!

Daylight robbery!!!

[Clinton1]

I'm seeing 14 pages, last thread's "last post" was in 2003.
sound right?

[Trav]

Not to me. The last thread I can see is buy Guy about the ultimate workbench.

I can only see 22 threads.

Perhaps is trying to send Silent and me a message?! :eek:

Trav

[Termite]

I'm seeing 391 on the main page but only one page shows up. :confused:

[Sturdee]

I can access all 14 pages containing 391 threads.:p

Maybe because I posted some of them.:D


Peter.

[Trav]

How many pages are yours Peter? :D

Can you post a link to the crosscut sled thread here? Perhaps that will break the nexus!

Trav

[Andy Mac]

Guys, I'm getting all 14 pages here too, so something's playing up at your virtual end:rolleyes: .
I found Rocker's thread here, assuming its the one you want:
http://www.woodworkforums.ubeaut.com.au/showthread.php?t=21462&highlight=crosscut+sled

Cheers,

[RETIRED]

I get all of them.

[Sturdee]

How many pages are yours Peter? :D

Can you post a link to the crosscut sled thread here? Perhaps that will break the nexus!

Trav

The Holmesglen Triton Club in one of their newsletters posted details of how to make a crosscut sled for the WC.

Not sure of which issue but check with Gumby as I'm sure he knows the link.:D

Peter.

[Termite]

Found the problem.

Go to the main forum page, scroll down to jigs and click. Go down to the bottom of the page where it says how far back you want to look and click on beginning.
For some reason mine had changed to month.

[Gumby]

The Holmesglen Triton Club in one of their newsletters posted details of how to make a crosscut sled for the WC.

Not sure of which issue but check with Gumby as I'm sure he knows the link.:D

Peter.


July 2003 issue of the newsletter.

www.tritonwoodworkers.org.au

[Trav]

Found the problem.

Go to the main forum page, scroll down to jigs and click. Go down to the bottom of the page where it says how far back you want to look and click on beginning.
For some reason mine had changed to month.

Cheers termite. Problem is now solved. Everyone can relax and take a deep breath knowing that I have all 14 pages! :D

And thanks to Andymac Sturdee and Gumby for the hints/links.

Trav

[Trav]

July 2003 issue of the newsletter.

www.tritonwoodworkers.org.au

I just checked it out - but it has been archived. Does anyone have an emailable version? Or can they post it here? Or PM it to me?

Thanks

Trav