pasey25
21st November 2005, 03:22 PM
Hi all. First time poster, long time lurker (boy I've learnt a lot off this forum)
I'm well into my summer projects and have been told by she who must be obeyed that before I go ahead and spend money on the large deck I'm planning that I need to have the air-conditioning taken care of.
Anyway, first step is to get all the electrical stuff organised in time for the a/c. This is a good chance to get the few changes to my wiring done all in one go.
Problem is I don't know any sparkys and I'd like to find/use someone that has been recommended to me.
I'm located in Watsonia (Nothern suburbs of Melb).
Below is a basic scope of work that I have typed out along with a pic of my house plan with references to locations shown in the scope of work:
Scope of work:
<!--[if !supportEmptyParas]--> <!--[endif]--><o =""></o>
Weatherboard house with good underframe access
<!--[if !supportEmptyParas]--> <!--[endif]--><o =""></o>
<!--[if !supportEmptyParas]-->1. Installation of 2 new dedicated 10amp circuits to single points ~4m from fuse box (side by side) in lieu of exiting points on this location on general household circuit. <o =""></o>
<!--[if !supportEmptyParas]-->2. Installation of 1 new 15 amp single circuit to single point on external wall 6m from fuse box. (existing point location) <o ="">
</o>
3. Installation of two new power points back to back (one internal wall one external wall) on existing circuit <!--[endif]--><o ="">
</o>
4. New circuit breaker board if required.
Appreciate if any sparkies on this forum would like to contact me regarding or if anyone can direct me to any sparkies that they feel are good and reasonably priced. I can supply materials if needed.
I'm well into my summer projects and have been told by she who must be obeyed that before I go ahead and spend money on the large deck I'm planning that I need to have the air-conditioning taken care of.
Anyway, first step is to get all the electrical stuff organised in time for the a/c. This is a good chance to get the few changes to my wiring done all in one go.
Problem is I don't know any sparkys and I'd like to find/use someone that has been recommended to me.
I'm located in Watsonia (Nothern suburbs of Melb).
Below is a basic scope of work that I have typed out along with a pic of my house plan with references to locations shown in the scope of work:
Scope of work:
<!--[if !supportEmptyParas]--> <!--[endif]--><o =""></o>
Weatherboard house with good underframe access
<!--[if !supportEmptyParas]--> <!--[endif]--><o =""></o>
<!--[if !supportEmptyParas]-->1. Installation of 2 new dedicated 10amp circuits to single points ~4m from fuse box (side by side) in lieu of exiting points on this location on general household circuit. <o =""></o>
<!--[if !supportEmptyParas]-->2. Installation of 1 new 15 amp single circuit to single point on external wall 6m from fuse box. (existing point location) <o ="">
</o>
3. Installation of two new power points back to back (one internal wall one external wall) on existing circuit <!--[endif]--><o ="">
</o>
4. New circuit breaker board if required.
Appreciate if any sparkies on this forum would like to contact me regarding or if anyone can direct me to any sparkies that they feel are good and reasonably priced. I can supply materials if needed.