PDA

View Full Version : stainless connector















Tonyz
5th June 2020, 09:46 PM
hunting down stainless pipe/tube connectors similar to ploy irrigation tube connectors. but hopefully would like to drill small hole in tube add a grub nut into connector, I need T * L pieces 19 or 25mm

point me in the right direction please

wood spirit
5th June 2020, 10:25 PM
Don't understand putting stainless connectors to poly tube. bit like mounting diamond on zinc for a ring.

Chief Tiff
5th June 2020, 10:39 PM
Do you mean barbed connections? If so then there’s very little in SS above 1/2” available in Australia. Dixons make SS barbed elbows and Tee splicers but only up to 1/2” in 304SS and 3/4” in brass.

You can cobble together barbed elbows and tees by using normal female threaded pipe elbows/tees and screwing in male threaded hose barbs; but obviously this is going to start getting costly.

What are you trying to build? There might be another way...

Tonyz
5th June 2020, 10:59 PM
bugga too much red wine and tiredness dont mix.

lets try again.
we all know what poly irrigation connectors look like. now imagine a stainless piece without Barbs that would push into stainless tube/pipe and be held together with grub screws. similar to what I have since found474992

that is what I am after, now to wait until after weekend and contact Oceania Industrial Components Brisbane, I am already shaking at what the price could be....:rolleyes:

BobL
5th June 2020, 11:26 PM
Do you mean like this?

These are 20 mm from Blackwoods
https://www.blackwoods.com.au/hoses-hose-fittings/couplings-safety/zinc-plated-steel-and-stainless-steel-hose-menders/mender-hose-mcc-stainless-steel-20mm/p/03302003

$10 each - you have to register to be able to see prices.
25mm are $15
474993

the size reflect the nominal size of the hose used. I would not trust a 20mm to be 20mm - I'd be measuring both the fitting and the pipe really carefully with verniers first.
Some metal turning is likely to be needed for a snug fit to the

jamieh
17th June 2020, 02:17 PM
Anything here maybe: Stainless pipe and tube fittings (https://www.anzor.com.au/stainless-tube-pipe-fittings)

Tonyz
17th June 2020, 07:15 PM
would love something but the $$$ comes into play, appears we can get sheet folded and riveted at a very good price, not exactly what I was after, but playing with others $$ :p