Charlie_6ft
17th January 2020, 08:55 AM
Hi, I am eyeing off an old bandsaw (I think it's about 32") and have thrown a few queries to Matty (L.S. Barker1970) but thought I would stop pestering him and share my questions here in the event it may help others. The saw is about 400klms from me so to daylte I have relied on pictures and a multitude of questions to the owner.
Q1. From the pics I have been provided it looks like at the very least it'll need new vulcanized rubber on the idler and drive wheel. Through a query a year or two ago someone mentioned a place in Goodna (Brisbane) that charged about $250, but can't find the info anywhere. Does anyone know where I may be able to get the wheels re-done in Brisbane?
Q2. I am told it was working fine last time it was used but has just been sitting in a shed for a while (it belonged to an ex-boat builder). With that said, I may need to repour the babbitt bearings, I did a quick Google and there doesn't seem to be a shortage of people in Australia who can supply the lead based babbitt metal. But who in Brisbane could someone recommend?
Q3. The motor on the saw is a Crompton Parkinson 2.75HP Three Phase motor. On the motor plate it has 940RPM. This sounds pretty slow? I would be replacing the motor with a Single Phase 3HP motor (Cheaper than a VFD) which looks very straight forward given the foot mounting assembly. What RPM would I seek in a motor as a replacement? I have read anything from 1400RPM to over 3000RPM!
Q1. From the pics I have been provided it looks like at the very least it'll need new vulcanized rubber on the idler and drive wheel. Through a query a year or two ago someone mentioned a place in Goodna (Brisbane) that charged about $250, but can't find the info anywhere. Does anyone know where I may be able to get the wheels re-done in Brisbane?
Q2. I am told it was working fine last time it was used but has just been sitting in a shed for a while (it belonged to an ex-boat builder). With that said, I may need to repour the babbitt bearings, I did a quick Google and there doesn't seem to be a shortage of people in Australia who can supply the lead based babbitt metal. But who in Brisbane could someone recommend?
Q3. The motor on the saw is a Crompton Parkinson 2.75HP Three Phase motor. On the motor plate it has 940RPM. This sounds pretty slow? I would be replacing the motor with a Single Phase 3HP motor (Cheaper than a VFD) which looks very straight forward given the foot mounting assembly. What RPM would I seek in a motor as a replacement? I have read anything from 1400RPM to over 3000RPM!