smidsy
27th October 2018, 12:35 AM
For those who recycle the twist up sauce bottles for glue but find the twist up nozzle is always clogging.
A trick I found is remove the twist up part, cut the inner part of the nozzle so the glue comes straight out instead of out the sides, then I use a peice of heat shrink tubing to create a smaller slightly longer nozzle.
Cheers
Paul
A trick I found is remove the twist up part, cut the inner part of the nozzle so the glue comes straight out instead of out the sides, then I use a peice of heat shrink tubing to create a smaller slightly longer nozzle.
Cheers
Paul