PDA

View Full Version : 90mm PVC storm water saddle clips



tricky4000
20th July 2017, 12:42 PM
Hi everyone,
I would like to know if I were to suspend a PVC pipe used for storm water, how far apart should the saddle clips be installed?
I was planning to use a bunch of these from Bunnings.
Does any one have any other suggestions?
Thanks
Tricks

https://2ecffd01e1ab3e9383f0-07db7b9624bbdf022e3b5395236d5cf8.ssl.cf4.rackcdn.com/Product-1600x1600/d9d97257-c1ea-4ad0-813a-aa771e46e265.jpg

Lappa
20th July 2017, 02:41 PM
This is for pressure pipe?.

http://www.vinidex.com.au/technical/pvc-pressure-pipe/above-ground-installation-for-pvc-pipe/

tricky4000
20th July 2017, 02:52 PM
No, just storm water

tricky4000
20th July 2017, 02:59 PM
Hey Lappa,
That link you sent answered my question. Roughly every 1.35m which is conveniently every third floor joist in my situation.
That's good enough for me.
Thanks
Dan.

Lappa
20th July 2017, 03:00 PM
AS/NZS 2032 2006
Pipes 65-150mm graded (sloping) every 1.2m, vertical every 2.5, and must be supported at every bend including fitting were the pipe exits a wall.