Oil Teak Furniture ?

[skot]

Fellow Forum Followers,

I just purchased a new teak bench seat for outside. It will be partially under cover of the roof eaves. Do you think I should treat it with an oil and if so, what do you recommend ? Or should I leave it to get that grey colour over the years.

Open for recommendations

Cheers

Scott

[Xanthorrhoeas]

Hi Scott,

It really depends on the quality of the teak. We have quite a few pieces of outdoor furniture made of teak. Some of them are good, clear timber with no holes or filler so we have let them go grey. They are about 15 years old now and doing fine for the most part. Some of the fold-up chairs have developed a few splits and the table has draw-bore pegs that tend to work loose, but can just be driven back in.

Then we have other, newer teak furniture that looked great when new - but as it has started to age it is clear that the original (apparently natural colour) brown finish was pigmented and hid a myriad of faults, all filled with brown filler. I am having to sand those and finish with an external furniture oil with a pigment in it. I need the pigmented oil to hide the filler! I have the Feast Watson Outdoor Furniture oil in Teak colour. I haven't had time to see if that lasts well or not.

I have also used and can highly recommend a marine oil finish called Deks Olje (available from Whitworths Marine) to finish external timber. We have a bench seat with back and seat made of slab Australian Cedar. The DO has successfully preserved the timber for many years now. It comes in two types #1 is very runny and you put it on wet on wet until the timber will not absorb any more. Then let it dry for a couple of days and - if you are happy with a matt finish that is it. You need to refresh by just putting more oil over the top (maybe a clean off with warm soapy water to remove dirt) every 6 months to a year. If you want a better, glossier finish then use Do #2 which is thicker and can give a semi-gloss to a high gloss finish. The DO #1 stinks with solvent so good ventilation (outside) is best.

So, if there is no filler and no incipient cracks then the lazy - let it go grey - works. For me, given the quality of the newer pieces, I would oil from scratch with either a pigmented oil, or for a more natural (and I believe proven long lasting) timber look I would use Deks Olje.

David

[Bohdan]

Looked at some teak furniture recently and was very disappointed with the quality of the teak. The new 'plantation grown' teak is nothing like the old growth timber that we used to get.

I'm not sure that it really is teak, it may be a look alike substitute as there wasn't much oiliness or character to it so I think that a good coating of oil may be required to preserve its 'character'.

[skot]

It is new growth timber...does look great at the moment but I don't think I will take the chance with weathering.

I will give it an oiling this weekend. I have some natural furniture oil in the shed.