kiwigeo
8th September 2005, 03:34 PM
Okay SWMBO is putting pressure on me to get the lounge fixed up and habitable......I dont get my new bandsaw untill its done so it HAS to get done.
Im stuck with going with a floating floor over pine strip flooring.....the adjoining room has been done with same and lounge has to match it.
Some questions:
1. Anyone know of any good suppliers of 20mm thick floating floor products in Adelaide? Would like something with a hard timber on top. If the supplier can provide a decent laying service Id use same otherwise Ill lay the stuff myself.
2. Dont want a pre finished product so will be sanding back and surfacing the floor myself. A ROS would be the way to go according to many in here.
3. There seem to be two schools of thought on floor finishing in here...tungoil/poly versus poly products. Intergrain make a Tung oil finish..anyone used it? Any other idea for a really tough wearing finish?
Thanks for any ideas.
Im stuck with going with a floating floor over pine strip flooring.....the adjoining room has been done with same and lounge has to match it.
Some questions:
1. Anyone know of any good suppliers of 20mm thick floating floor products in Adelaide? Would like something with a hard timber on top. If the supplier can provide a decent laying service Id use same otherwise Ill lay the stuff myself.
2. Dont want a pre finished product so will be sanding back and surfacing the floor myself. A ROS would be the way to go according to many in here.
3. There seem to be two schools of thought on floor finishing in here...tungoil/poly versus poly products. Intergrain make a Tung oil finish..anyone used it? Any other idea for a really tough wearing finish?
Thanks for any ideas.