spraygun moisture trap question

[old_picker]

got one of these to put on my mini star gravity feed gun
382895
Which way is the airflow ? airline connects to the brass male thread? or female in the right hand end?

[Cliff Rogers]

The inlet side should be the same side of the filter that the water trap drain is on.

This should help.

http://i298.photobucket.com/albums/mm271/ianmorgan50/2DF79A80-6293-4F61-8B9A-504594C69BE6-2624-000002E36EA182D0_zps947516de.jpg

[old_picker]

thanks cliff - i always used it that way but i saw an ozito unit exactly the same but was marked as airflow going in the opposite direction. not the first time i got things upside down so i thought i better ask

[Arron]

I'm a bit late to the party I know, but some of them are marked the other way.
This is one of mine. Clearly the same build but direction arrow goes the other way.

385581

I've actually been using this the same way as Cliff suggests until today when I took a closer look. It didn't seem to matter.

[old_picker]

I'm a bit late to the party I know, but some of them are marked the other way.
This is one of mine. Clearly the same build but direction arrow goes the other way.

385581

I've actually been using this the same way as Cliff suggests until today when I took a closer look. It didn't seem to matter.

hah! just noticed today the compressor running the brad and staple gun has its running opposite like yours as well - i looked over mine when i posted and also looked at the one i dropped on the floor and broke and i couldn't figure out which way was right and looks to me like either way would be ok as well