Watcha Dooen @ Dooen GTG 23 - 26 Jan

[doug3030]

Jools would probably be interested in the demo, but we will only be there until Sunday arvo too due to work commitments on the Monday.

Also we have been offered a bed in Horsham by friends of ours. Therefore we may not be camping out. These friends stay with us when they come to Melbourne so it is hard to knock back their offer when they want to return the favour.

Cheers

Doug

[DaveTTC]

Projector is fine to go and I have an old screen (has a few wrinkles) but should do the job. Do we have any others interested or should I just plan for
a demo for Raechell and you? Don't want to bring extra equipment if not required as we may go to Avoca and the Pyrenees on Mondat anf Tuesday - still to be decided.

Is there power available for the caravan or should I bring a generator?
Bob
Bob,

We may need multiple demo's if you're up for it. You may have become the main attraction. I knew I should have been selling tickets lol

Dave TTC
Turning Wood Into Art

[doug3030]

If Bob would be kind enough to do two demos, I would suggest one on Saturday evening for those who can only be there Saturday and Sunday and another on Monday evening for the latecomers before everyone goes home on Tuesday. That might cover everyone?

Of course it is up to Bob if he wants to do that.

Cheers

Doug

[Simplicity]

If anyone who is going to the Horsham GTG
is pretty good at finishing please stand up now you are needed badly .
I would like some pointers in that regard please.
At the moment ,my main interest would be ,in finishing small items like saw handles ,tool handles ,extra.boxes.
I would like to use shellac finishes ,more ie French polishing ,but I'm open to other ideas
.My main problem being I'm male ,I'm in patient ,I don't always listen well ,I'm easily distracted ,I'm male ,I'm in patient lol.
This may also interested some others going as well ,so we could get a little tiny group learning thing happening.
Maybe give us something to do ,for a few hours .
Other wise it could be lots of listen to Daves bad humour.
Not sure if it's political incorrect in these times of political correctness, to try and bag our most gracious host all ready( I take full responsibility for me on this one)
Even before it starts .

[DaveTTC]

No bad humor from me ever

Why did the chicken cross theroad for the 23rd time?

Dave TTC
Turning Wood Into Art

[crowie]

No bad humor from me ever

Why did the chicken cross theroad for the 23rd time?

Dave TTC
Turning Wood Into Art

To hide in the pub so you don't eat him for Australia Day GTG.....

[doug3030]

Why did the chicken cross the road for the 23rd time?

To watch a man laying bricks? :D

Cheers

Doug

[Dirk_Pittwater]

No bad humor from me ever

Why did the chicken cross theroad for the 23rd time?

Dave TTC
Turning Wood Into Art
To drink beer and not have to help lay a floor...

I might have to go over and supervise the chicken...



Knowledge is knowing that a tomato is a fruit, but Wisdom is knowing not to put it in a fruit salad

[Uncle Al]

At the last GTG at Jerilderee I brought a shade structure and an urn. Do you need either or both for Dooen?.
Getting closer now, anything else needed?

Alan...

[DaveTTC]

At the last GTG at Jerilderee I brought a shade structure and an urn. Do you need either or both for Dooen?.
Getting closer now, anything else needed?

Alan...
Both would be fantastic

Bring a chair too and good weather

Dave TTC
Turning Wood Into Art

[Uncle Al]

Have put in a request for the good weather, not sure how many brownie points I have in that department. Other items will be packed ready for the long haul.

See Ya,

Alan...

[Keith_1]

Looks like I will have to bring my "Dads Bad Joke Book" :D

[DaveTTC]

Looks like I will have to bring my "Dads Bad Joke Book" :D
I think so

Dave TTC
Turning Wood Into Art

[Pittwater Pete]

Well...Dirk and I are starting to think about our trip down to Dave's 4 day Extravaganza and are wondering what would be the best route to take. I need to pass through Austinmer (near Wollongong) for a quote at 9am on Friday but other than that we are as free as a bird. What do you all think would be the nicest route?

Regards

Pete.

[DaveTTC]

I generally go wagga and cross country from there but if you go down a little further to Shepparton thats nice country

This time of year all the paddicks will be stripped and dry. Not sure if thee will be any green anywhere. If there is pics for evidence ;)

From Shepparton go theough the back blocks. You'll get a few small towns and pass through Bendigo.

Best potato scollops in Australia in St Arnaud about three blocks up the main street on the left diag opposite an old bank I think

Dave TTC
Turning Wood Into Art

[rwbuild]

Depends if you want to get to Dave's quickly or not but down the Princess Hwy turn off to Kangaroo Valley, Moss Vale onto Hume, down to Albury then across to Daves
or
Down to Batemans Bay, across to Canberra, Wagga then across to Dave

[Big Shed]

We generally try to avoid Shepparton as it can hold you up a fair bit.

Normally we get off the Hume at Violet Town, then Rushworth to Bendigo through dairy country, then St Arnaud to Dooen.

https://www.google.com.au/maps/dir/Austinmer+NSW+2515/Violet+Town,+Victoria/Rushworth,+Victoria/St+Arnaud,+Victoria/Dooen+VIC/@-35.4064946,142.0917587,6z/data=!3m1!4b1!4m32!4m31!1m5!1m1!1s0x6b12e022a33495bf:0x5017d681632e0a0!2m2!1d150.9342562!2d-34.3067638!1m5!1m1!1s0x6b279ea4f7a94bd9:0x40579a430a09a80!2m2!1d145.7156823!2d-36.6365396!1m5!1m1!1s0x6ad847af933adf3b:0x40579a430a097b0!2m2!1d145.0115531!2d-36.5843752!1m5!1m1!1s0x6ad0673650c44965:0x40579a430a0b420!2m2!1d143.2570167!2d-36.6151035!1m5!1m1!1s0x6ace4b8a4b725c77:0x50579a430a0d510!2m2!1d142.2581144!2d-36.6560602!3e0?hl=en

[Uncle Al]

On my way to Dooen, I will be calling in to Albury to pick up some clamps and a Dust Cyclone from Aldav.
If anyone going to the GTG wants to order some new toys from Aldav, I can bring them with me.

Have a look at his site - Aldav's Store items - Get great deals on Woodworking Tools, Files Burrs items on eBay Stores! (http://stores.ebay.com.au/Aldavs-Store/_i.html?rt=nc&_dmd=2&_sid=58699713&_sop=10&_trksid=p4634.c0.m14.l1581&_pgn=1) if you need any retail therapy after the silly season.

Alan...

[DaveTTC]

On my way to Dooen, I will be calling in to Albury to pick up some clamps and a Dust Cyclone from Aldav.
If anyone going to the GTG wants to order some new toys from Aldav, I can bring them with me.

Have a look at his site - Aldav's Store items - Get great deals on Woodworking Tools, Files Burrs items on eBay Stores! (http://stores.ebay.com.au/Aldavs-Store/_i.html?rt=nc&_dmd=2&_sid=58699713&_sop=10&_trksid=p4634.c0.m14.l1581&_pgn=1) if you need any retail therapy after the silly season.

Alan...
On your account lol ;)

Dave TTC
Turning Wood Into Art

[doug3030]

If anyone going to the GTG wants to order some new toys from Aldav, I can bring them with me.

That is really nice of you Al. :2tsup:

Not sure if there's anything I want at the moment, but its nice to know that if there is you can get it for me.

I generally catch up with David from Aldav's store at the HTPAA tool sales I highly recommend his mini cyclones for the vacuum cleaner. Good units and well priced. :2tsup:

Cheers

Doug

[crowie]

Dave, if I may request an update on who and when they are planning/hoping to attend, thank you....
NOT URGENT, just over the next day or two, thank you. Cheers, Peter

G'Day Dave, I know you're pretty busy with the floor......Peter

[DaveTTC]

Can everyone let me know what days you will be here. Thx. On the thread will be good as my inbox will get chockers

Dave TTC
Turning Wood Into Art

[crowie]

Can everyone let me know what days you will be here. Thx. On the thread will be good as my inbox will get chockers

Dave TTC
Turning Wood Into Art

Ray [aka rwbuild] & I will arrive [all being well] for a 6.30pm tea on Sunday and then be leaving early Wednesday morning...thanks Dave, Peter [aka crowie]

[Pittwater Pete]

Dirk and I will be there on Saturday morning and leave Monday morning.
Looking forward to it.
Pete.

[doug3030]

Jools and I will be arriving Saturday probably late morning and will have to reluctantly depart on Sunday afternoon to be at work in Melbourne the following morning. We will be spending Saturday night at a friends ' home in Horsham.

Cheers

Doug

[Gabriel]

Depending in the time I drag myself out of bed saturday, I would say I'll be there Saturday before lunch, leaving Sunday afternoon

[Simplicity]

We will be there Friday some time
And leaving Monday some time
And Sally is soooo looking forward to it
And bringing champagne lady's only [emoji3]

[Oldgreybeard]

Expect to arrive Saturday morning - probably leave Tuesday. Will bring some nibblies for "Happy Hour"

[Uncle Al]

On your account lol ;)

Dave TTC
Turning Wood Into Art
Um, I think you will be waiting quite a while. Lotto looks so easy to win, but I must be doing something wrong. If I win before the GTG, I'll have a shopping spree in Aldav's store on your behalf!

Drive safely,
Alan...

[Uncle Al]

I will be there Saturday mid morning, and will leave Horsham first thing on the Wednesday. I'll probably do a bit of exploring on the Monday, depending on what else is happening.

Getting close now.

Alan...

[Keith_1]

Cathie and I will be arriving mid morning Sunday. Leaving sometime Monday

Keith

[Oldgreybeard]

Dave, Where exactly are you in Dooen? I know there are not many houses, but it would be good to know which one.

If you have given this info before, my apologies for not seeing it.

Bob

[DaveTTC]

Will try to pm everyone tonight with info

Dave TTC
Turning Wood Into Art

[crowie]

Dave, Where exactly are you in Dooen? I know there are not many houses, but it would be good to know which one.

If you have given this info before, my apologies for not seeing it.

Bob
Only info I can remember that Dave gave out was next to the pub????
So yes specifics in a "PM" or email would be handy.....

[DaveTTC]

Sent info to crowie on address. He kindly volunteered to send on to everyone.

Thanks crowie. You're a gentleman

Dave TTC
Turning Wood Into Art

[crowie]

Sent info to crowie on address. He kindly volunteered to send on to everyone.

Thanks crowie. You're a gentleman

Dave TTC
Turning Wood Into Art

I've just sent out "PM" to all the blokes who are attending, I THINK.
Had to do them 5 at a time so I may have missed folk....
Please if you didn't get the info, make a note in the thread so I can send the info on to you without bunging up my mail box....Thank you

[crowie]

Also, if folk have forgot to inform Dave of there attendance at the Horsham GTG....
PLEASE JUST DO IT NOW!!!!!
Dave needs to ensure there's enough food for all to be feed, thank you.....

[DaveTTC]

Your a champion crowie

Dave TTC
Turning Wood Into Art

[Gabriel]

Think I was missed crowie.....

Thanks
Gab

[DaveTTC]

Watcha Dooen at Dooen.

Know what I'll be doeen

http://uploads.tapatalk-cdn.com/20160119/f04150fa873ed3ab3273305af0245341.jpg

Unloading

http://uploads.tapatalk-cdn.com/20160119/507c73e83f7d7df67a285ae5f0ecc127.jpg

Some

http://uploads.tapatalk-cdn.com/20160119/7da64fecb512ee9cae1496cdf639ff3b.jpg

Old

http://uploads.tapatalk-cdn.com/20160119/5f88b346992c3da1aac8adcc3ad4ddaf.jpg

Iron

Dave TTC
Turning Wood Into Art

[DaveTTC]

A minutes silence please .....

Repliconics has just informed due to unforeseen circumstances he will not be able to attend

He will be greatly missed. For some to see him again and for others who have never met him.

Trev ... Oldgreybeard is bringing a projector and screen. We'll be sure to have a big pic of you amongst the other pics

Dave TTC
Turning Wood Into Art

[doug3030]

As I mentioned previously, Jools and I will be staying with friends in Horsham overnight

Our friends, Allan and Annette, will probably want to come out to the GTG with us at some time.

Dave, is that ok with our gracious host?

Allan is a woodworker, but not professionally or as a hobby. To him it is a means to an end when he is doing a project. He does enjoy it though and is very good at it. He has built a very nice wooden trailer sailer which is a testament to his ability.

There is also the possibility that Jools and Annette may get stuck into sewing/quilting/knitting/crocheting and they might not even get out of the house we are staying at. We will just have to see what the weekend brings.

Cheers

Doug

[DaveTTC]

Yes totally fine. I think thr girls will like another girl out there

Dave TTC
Turning Wood Into Art

[DaveTTC]

Oldgreybeard's wife (name slips me atm) may be bringing a spinning wheel. Girls might be interested

Dave TTC
Turning Wood Into Art

[doug3030]

Please if you didn't get the info, make a note in the thread so I can send the info on to you without bunging up my mail box....Thank you

:((

[crowie]

Think I was missed crowie.....

Thanks
Gab


Fixed sir...apologies...I got all mucked up with the 5 at a time thingo.....

[crowie]

:((


sorry doug....fixed

[crowie]

As I mentioned previously, Jools and I will be staying with friends in Horsham overnight

Our friends, Allan and Annette, will probably want to come out to the GTG with us at some time.

Dave, is that ok with our gracious host?

Allan is a woodworker, but not professionally or as a hobby. To him it is a means to an end when he is doing a project. He does enjoy it though and is very good at it. He has built a very nice wooden trailer sailer which is a testament to his ability.

There is also the possibility that Jools and Annette may get stuck into sewing/quilting/knitting/crocheting and they might not even get out of the house we are staying at. We will just have to see what the weekend brings.

Cheers

Doug

Cathy, Keith's wife is a very good quilter!!!!

[crowie]

A minutes silence please .....

Repliconics has just informed due to unforeseen circumstances he will not be able to attend

He will be greatly missed. For some to see him again and for others who have never met him.

Trev ... Oldgreybeard is bringing a projector and screen. We'll be sure to have a big pic of you amongst the other pics

Dave TTC
Turning Wood Into Art


BUGGER!!! and I bought a gift for him, too.....

[springwater]

Thanks for th PM Crowie :2tsup: at this stage I'm coming, heaps of pressure at work due to a back log but I'm keeping my hand down. I'll probably come for Saturday and most of Sunday. I'm happy to forfeit the bus because I can sleep in the back of my car. Dave I'm pretty sure I won't get the tea tree I mentioned for the drum sticks by the weekend, sorry, but we can work something out another time. Has anyone going got a Dremel? I've got some equipment for it to give away. By the way, what's the address :rolleyes:

[chrisb691]

Hi all,

Unfortunately, I will be a no show this time.

[crowie]

Thanks for th PM Crowie :2tsup: at this stage I'm coming, heaps of pressure at work due to a back log but I'm keeping my hand down. I'll probably come for Saturday and most of Sunday. I'm happy to forfeit the bus because I can sleep in the back of my car. Dave I'm pretty sure I won't get the tea tree I mentioned for the drum sticks by the weekend, sorry, but we can work something out another time. Has anyone going got a Dremel? I've got some equipment for it to give away. By the way, what's the address :rolleyes:
If no one else has use for the Dremel I'd be pleased for the bits thank you. Crowie

[DaveTTC]

Ive got a little grinder that has a flex cord and o think it takes dremel stuff.

Crowie can have them. I did not see there were other posts

Ned is in the car as is the face shield log

Dave TTC
Turning Wood Into Art

[DaveTTC]

You'll have to come another time Chris

Dave TTC
Turning Wood Into Art

[doug3030]

Oldgreybeard's wife (name slips me atm) may be bringing a spinning wheel.

Jools recently acquired a travelling spinning wheel. Trouble is she has not spun for over 20 years. She has been looking for someone to help her get started again.

I will add one travelling spinning wheel and some fleece to the load list for the ute. Maybe the girls can run a spinning workshop.

I believe it is no coincidence that so many woodies have "crafty" ladies. I think they actively but stealthily hunt us down for our layout skills and ability to fix spinning wheels/looms/embroidery frames etc.

Cheers

Doug

[Treecycle]

I will still be coming so thanks for the info Crowie. Slight change of plans though as I originally said Sat & Sun but due to some other things and wishing to abide by Crowie's request, I will now be there Sun and Mon.
Dave, do you have any requests in regard to food or anything else that would be of benefit?

[DaveTTC]

Just bring yiurself and have a food time. If there is something you particularly like bring it along. If there is something youd like to share by all means being it

Dave TTC
Turning Wood Into Art

[Uncle Al]

Thanks Crowie, address received. I will have to get busy tomorrow, packing bits and pieces as I'm setting off first thing Thursday.
Alan...

[DaveTTC]

Good news

http://uploads.tapatalk-cdn.com/20160119/c793d5b60206444ee8954918d942854d.jpg

Cause man have we had some stinkers of late

Dave TTC
Turning Wood Into Art

[Simplicity]

Cool
O I'm so funny

[Simplicity]

Crowie
Thank you for being Daves PA

Cheers Matt

[DaveTTC]

Cool
O I'm so funny
Im shaking my head with a smile

Dave TTC
Turning Wood Into Art

[Simplicity]

Care full it don't drop off

[springwater]

Ive got a little grinder that has a flex cord and o think it takes dremel stuff.

Crowie can have them. I did not see there were other posts

Ned is in the car as is the face shield log

Dave TTC
Turning Wood Into Art

Thanks Dave, I've still got the bolts you made for Ned, hopefully the wood pile will provide so,e goods. Good one Crowie, glad for you to have all the bits and pieces, I hope you'll enjoy them.

[Keith_1]

Cathy, Keith's wife is a very good quilter!!!!

I will get Cathie to bring one of the AFL Geelong CATS quilts she made - Not the Sydney Swans one she made Crowie - GO CATS

Regards

Keith

[Pittwater Pete]

Hey Crowie.

I received the address, many thanks. We are really looking forward to the weekend.
Also, I've got a few bits and pieces of Australian Cedar, Hoop Pine, Camphor Laurel, etc that would be good for your toy making. Would you like to have it? I won't drag it to Dooen as I'm a bit tight for space in the ute. But we can catch up after if you like.
Best regards.
Pete.

[crowie]

Hey Crowie.

I received the address, many thanks. We are really looking forward to the weekend.
Also, I've got a few bits and pieces of Australian Cedar, Hoop Pine, Camphor Laurel, etc that would be good for your toy making. Would you like to have it? I won't drag it to Dooen as I'm a bit tight for space in the ute. But we can catch up after if you like.
Best regards.
Pete.

That is oh so tempting :? :rolleyes:, but after sounds good Pete :wink:, as I'll be in "dutch" if I bring more timber home from the weekend :C......THANK YOU...

[Keith_1]

I will get Cathie to bring one of the AFL Geelong CATS quilts she made - Not the Sydney Swans one she made Crowie - GO CATS

Regards

Keith

Fabulous CATS and ...... swans


369128369127

[Keith_1]

That 3rd quilt of the CATS I put in and it was a photo of another CATS quilt that had not been quilted yet

[DaveTTC]

Who are tge cats. Is that the Broadway production?

Dave TTC
Turning Wood Into Art

[Oldgreybeard]

Who are tge cats. Is that the Broadway production?

Dave TTC
Turning Wood Into Art

Cheeky!!
You're in Victoria now home of AFL, gotta get with it!!

[Simplicity]

Have a chat with Sally
She will make it all better for you

[DaveTTC]

French Toast for breakie any day PittWater Pete is there. He's cooking. Big thumbs up

Dave TTC
Turning Wood Into Art

[David Mitchell]

I am coming up on Sunday and was wondering what to bring ?
So I thought I would bring some Osage Orange pen Blanks and larger pieces if anyone was interested,mulberry ,sheoak, bulloak
Regards

David

[DaveTTC]

Sounds mighty fine.

Did crowie message you address details etc

Dave TTC
Turning Wood Into Art

[crowie]

Sounds mighty fine.

Did crowie message you address details etc

Dave TTC
Turning Wood Into Art


Sorry Boss, Another one missed but now corrected.....

[DaveTTC]

Sorry Boss, Another one missed but now corrected.....
And RayG. Id did pm him but your pm has more details than mine

Dave TTC
Turning Wood Into Art

[crowie]

And RayG. Id did pm him but your pm has more details than mine

Dave TTC
Turning Wood Into Art

All I can say Boss, I'm sorry, but for the wages I'm getting you just can't hire good help these days....fixed...

Also Dave, I've sent you a "PM" about another attendee coming up for the weekend.....

[crowie]

French Toast for breakie any day PittWater Pete is there. He's cooking. Big thumbs up

Dave TTC
Turning Wood Into Art

Sorry Dave & Pete BUT FRENCH TOAST ISN'T BREAKFAST......:rolleyes: :~ :no:

[DaveTTC]

All I can say Boss, I'm sorry, but for the wages I'm getting you just can't hire good help these days....fixed...

Also Dave, I've sent you a "PM" about another attendee coming up for the weekend.....
Got a repeat of gth details. But i do know of the other attendee from southern regions

There is one from your way who mifht have been ringing you for a lift too. He was going to rude with you last year but did not make it

Sorry Dave & Pete BUT FRENCH TOAST ISN'T BREAKFAST......:rolleyes: :~ :no:
There will be cereals, aussie toast, bacon, eggs and baked beans too

Dave TTC
Turning Wood Into Art

[Simplicity]

What is "Aussie " toast
I'm all for French toast being a real breakfast [emoji3]

[DaveTTC]

Aussie toast .... black and crispy

Dave TTC
Turning Wood Into Art

[Simplicity]

Vegemite

[DaveTTC]

If anyone has some surplus paper plates, plastic utensils etc feel free to bring it along

Dave TTC
Turning Wood Into Art

[DaveTTC]

Also.

Any woodturners attending may like to being a few basic chisels if they want to turn or teach some others as i may not have enough chisels to go around all 4 or 5 lathes that will be running

Dave TTC
Turning Wood Into Art

[Treecycle]

Got a few plates, bowls and plastic cutlery I will bring. I hope everyone likes Christmas patterns.

[doug3030]

Dave, do you have anything that could drill a fairly significant hole in a piece of metal at the GTG?

Cheers

Doug

[DaveTTC]

I have a drill press. What size hole. Do you have a bit are you hoping i have one

Dave TTC
Turning Wood Into Art

[DaveTTC]

I do have a mill as well.

Dave TTC
Turning Wood Into Art

[doug3030]

I have a drill press. What size hole. Do you have a bit are you hoping i have one

Dave TTC
Turning Wood Into Art

I will bring the job along. It is a tail-vise screw handle hole that they seem to have messed up the casting of.

I bought it years ago so no point in trying to take it back. trying to make it about the same size as the hole in the shoulder-vise screw so the two timber handles can match. I do not have a bit this big.

Cheers

Doug

[DaveTTC]

No worries. Bring it along. If you have an idea what size someone else mayhave an appropriate but they can bring if I do not

Dave TTC
Turning Wood Into Art

[Oldgreybeard]

I will bring the job along. It is a tail-vise screw handle hole that they seem to have messed up the casting of.

I bought it years ago so no point in trying to take it back. trying to make it about the same size as the hole in :Dshoulder-vise screw so the two timber handles can match. I do not have a bit this big.

Cheers

Doug

I have 1" metal bit (as opposed to wood bit):D:D
I am packing thw van in the morning - so let me know ASAP

Dave - also have some plastic cutlery, etc

Bob

[David Mitchell]

Been too busy today to get pictures ,so will get them tomorrow
regards
David Mitchell

[Pittwater Pete]

I will bring some plastic plates and cutlery etc too.

One more sleep.

[crowie]

One more sleep.

Not for all of us, I have medical appt tomorrow morning, family birthday tea tomorrow night & laying gymnastics floor matting on Saturday morning....

Safe travels all, see you Sunday for tea.....

[Uncle Al]

I'm half way there (Wangarrata), too far to go back home and get some chisels and paper plates.
I called into Aldav's place in Albury on the way through, I now have a heavier car and a lighter wallet!. I picked up some parallel clamps, 2 other styles of clamps, some router bits, some hinges and a dust collector thingy. Not all for me, but an impressive haul all the same.
We can play with the dust collector thingy on the weekend, apparently it does an awesome job for such a small bit of gear.
See Ya Saturday,

Alan...

[doug3030]

No worries. Bring it along. If you have an idea what size someone else may have an appropriate bit they can bring if I do not

369249
369250

Job is to make the one on the right look like the one on the left. (they are closer in size than it appears in the photo)

30mm or 1 3/16 in the old money would do the job. :2tsup:

Cheers

Doug

[Oldgreybeard]

Sorry Doug, 25 mm is my largest.

Bob

[Oldgreybeard]

I will bring a selection of gouges, etc
Bob

[Simplicity]

I think we are bringing paper plates and plastic knives and forks
Quite a few

Doug if those ends come off
You may be able to machine them in a metal lathe
Sorry no editing for me tonight the tennis is on